Exchange System + turbogate gateway Deployment Scheme

The deployment structure adopts turbogate as the Mail Gateway and Exchange Server 2007 as the intranet mail system. This deployment method prevents the Intranet exchange mail server from being directly exposed to the Internet, instead, it uses the SMTP protocol to access the Internet through the turbogate Mail Gateway, thus ensuring the security of the Intranet exchange mail server. I. topology structure   Ii. Deployment Method Hypothesis: ◆ Turbogate email gateway IP Address: IP address 1: 192.168.1.10, IP address 2: 192.168.0.20 ◆ Intranet exchange email server IP Address: 192.168.0.10 1. Deployment of turbogate Email Gateway 1.1 configure the gateway running mode. The default domain of the gateway is the primary domain name of the Intranet exchange mail server, as shown in: 1.2 configure the Intranet exchange mail server to allow sending mails outside the turbogate Mail Gateway. Set the list of permitted transit IP addresses Go to turbomail administrator> system Settings> SMTP service> relay address list and add the Intranet Server IP address. 1.3 set the rules for connecting the Internet to the Intranet Go to turbomail administrator-system settings-SMTP Service-relay gateway list Add Internet to intranet rules   2. Deployment of Intranet exchange email server Set the exchange mail server to go out through the turbogate Mail Gateway. Log on to the exchange mail server console. 2.1 click "organization configuration"> "Hub transmission" to create a new sending connection ,:   2.2 create a new sending connection rule, define the rule name, and click Next, as shown in:   2.3 know the address space to which this connector routes the mail, as shown in: 2.4 set the mail sending method for this connector. Here, the smart host routing method is used to route the mail to the turbogate Mail Gateway. Enter the IP address of the smart host to the turbogate Mail Gateway, click Next, as shown in: 2.5 configure the smart Host Authentication Settings. Click "NONE" here, and then click "Next", as shown in: 2.6 The configuration is complete, as shown below: 3. workflow 1. send an email to the Internet through the Intranet exchange account 2. send an email to the Intranet exchange account

 

Exchange System + turbogate gateway Deployment Scheme