Exclusive stunt: Use a steam iron to repair scratched discs

A friend playing on a computer does not have a few CDs, especially some game players and movie enthusiasts. After a long time, they will find that many CDs have been accumulated, and some of them have very good results, however, some CDs have become the killer of optical drive, but sometimes they cannot be lost. Some of them are classic and it is difficult to buy the same one. This is really a headache! I have been troubled by such troubles. How can I make these "waste" disks play a new role? I found a clever way to fix the uneven disc during my exploration.

Fix General scratched discs

I have read some articles on how to fix the disc on the Internet and fixed the disc according to the steps mentioned in the article. The usual method is to smear the toothpaste and water on the disc data, then I used my fingers to repeatedly spread the toothpaste evenly on the Data surface of the disc clockwise. Through this method, the scratches on the disc were flattened. Through some effort, the effect was quite good, many discs that have already been declared to be the death penalty have been re-launched.

However, some CDs still have poor performance. I have carefully observed that the data surface of these CDs has basically no scratches, but why is it so hard to read them, during observation, we found that these CDs are similar, that is, when the discs are flushed and viewed from the side, we found that the discs are not very flat, the author estimates that the reason why the optical drive cannot be well read due to the disk being uneven. The current drive speed is very fast, and the optical drive has a high requirement on the geometric shape rules of the disc, during High-speed rotation, as long as the disc is a little irregular, it will fluctuate up and down under the drive of the drive shaft motor, which makes it difficult for the laser head to align with the disc to adjust the focal length.

How to fix uneven discs

When I saw my mom ironing the clothes, the genie suddenly flashed. No matter how wrinkled the clothes, as long as they were ironed by the iron, they would become very smooth. Can I use the iron to flatten the CD? I found through experiments that the effect was good and I saved a lot of CDs. Here we will teach you how to use the iron to repair the uneven disc.

Tools: steam iron (other iron not tried), thin cloth, glass, a little water.

Procedure:

A. First, use A thin cloth to wrap the CD to be repaired, and then wrap it with A layer on one side. Then, sprinkle the clear water on it to wet the cloth. Pay attention that the cloth must be pasted on the CD with no wrinkles.

B. then place the wrapped disc on a flat table. If you cannot find a block of glass, the glass is relatively flat. Then, the iron is heated to a certain temperature. The iron is reironed several times on the CD. After the iron is ironed, the restoration work is finished after it is dry and many CDs are saved. Is it very simple? If the ironing clothes are not good, you can find a diligent MM to operate, huh, huh!