Failed to start the virtual computer. Because the following physical NICs cannot be found, you can modify or disable the network settings of the virtual computer.

Failed to start the virtual computer. Because the following physical NICs cannot be found, you can modify or disable the network settings of the virtual computer.

 

Open the Linux system exported from another virtual machine and import it to the local virtual machine. The following error is reported when the virtual machine is opened:

 

Click 'change network settings'. The following page is displayed:

 

Change the 'Connection method' from 'bridging 'to 'internal network.

As soon as you enable the virtual Nic, the real machine will prompt: You have started multiple physical NICs and are forced to go offline.

Normally, this is not the case.

I have also set up an environment like yours to access the Internet at the same time. The interconnection between hosts and virtual machines is not a problem.

Let me ask you about the management center of your campus network.

Search for "you have started multiple physical NICs"
You will find that the campus network is faulty.
The solution is to disable the Virtual Machine Nic.

If conditions are met, you can have another network card. I think this problem may also occur,
This is not a software issue, but a restriction on the Management end.

When vwifi is set in WIN7, the network cannot be started. Why? Network Support for NICs

You open the network sharing center and right-click your broadband connection → properties → share → select the desired network for the home network connection