FAQs about Alpha vrov4 v4 and relevant answers

Everyone should be familiar with Alpha router v4. Its problems are similar to those of other types of routers, and the solution is similar. Therefore, you have mastered the following methods and basically all the router solutions. I hope you will have a better understanding.

Problem description: the younger brother uses an Alpha router v4, and the connection in the current status box is unable to connect to the previous settings )?

PingIP addresses are also normal. Which of the following gives me some advice? Check all your hardware, such as the network cable and network card. If they work normally, go to the link wizard, and whether your adsl modem is working properly, and whether your account and password are correct.

Q: Why cannot I restore the factory settings of the Alpha router V4?

What is the problem that an Alpha v4 router cannot access the configuration page of 192.168.18.1? You cannot reset the factory settings on the Internet. A single machine can be used. There is no way now. Generally, there is a small hole on the outside of the router, and a needle is used for several seconds. OK. You can change your host IP address to 192.168.18.2 and try again.

Problem description: How does one configure the alphago router v4?

If the dhcp service of the Alpha V4 router is disabled, it cannot enter the vro192.168.192.168.1 and restart. What should I do? Correctly, for example, remote management from the Internet, you need to know the IP address of your organization, and first set the Remote Management port in the route, during remote operations, you only need to enter your IP address + port in the IE Address Bar. If your IP address is 210.15.180.61 and the remote port set in the route is 6666, you can enter http in the address bar: // 210. l5.180.61: 6666 or http: // 210. l5.180.61. After logging on as an administrator, you can manage and estimate that the vro configuration method is similar. Please explain how to set up two computers to access the Internet through multiple ADSL.

1. enable host Connection Sharing

Log on to Windows XP as an administrator, right-click "Network neighbors", and select "properties" to open the "Network Connection" dialog box. In the "Network Connection" dialog box, right-click your current network connection type name, and select the "properties" command in the shortcut menu to bring up the "Network Connection Properties" dialog box, switch to the "advanced" tab (1) and select the "allow other network users to connect through the Internet connection of this computer" check box.

If you want another computer in the network to automatically call the connection when accessing the Internet, you also need to select the "Create a dial-up connection when the computer on my network attempts to access the Internet" check box. Click OK. In the displayed dialog box, "Internet Connection Sharing is started, the IP address of the LAN adapter is set to 192.168.0.1", and click "yes". Internet Connection Sharing is started.

2. Configure the client

If you want to use Windows XP to connect to Internet sharing, we recommend that you use IE5.0 or a later version. If the client is Windows XP, right-click "Local Connection", select the "properties" command, and in the Local Connection Properties dialog box that appears, select the "TCP/IP" protocol, and click the "properties" button to set the IP address of the NIC, for example, 192.168.0.2. Set the subnet mask to be the same as that of the host Nic, for example, 255.255.255.0. At the same time, set the default gateway address to the IP address of the shared connection host 192.168.0.1. After 192.168.18.1 cannot be entered, restart the Alpha router v4, and enter 192.168.18.1 in the address bar. What can be done?

Please reply !! Also, under your "I want to ask" interface, "Please select the product that I use for the corresponding product. When you select the next page, the page will automatically jump to your homepage !! We also hope you can make improvements. The reason why the configuration page cannot be accessed is that the IP address of the Alpha vrov4 v4 has been changed. Resetting the route solves the IP address setting error and changing it to automatic or incorrect iesetting, remove the check box in tool-intelnet option-connection-LAN Settings.