Fast Router FR300 modified OPENWRT system, plus SS, Chinese

First bought on the internet 16M Flash inch and 64M memory, please write a OpenWrt system (version casually, but the chip to the same, can not write wrong. To facilitate their own good upgrade of other versions, my is AR9341, with the TL-WR 841 V8 firmware, TP firmware), blown off the original flash memory, and the storage of the purchase of flash memory, need a little craft. (Need 4M above the flash inch, the best 64M of memory is enough)

Before you do, you must have a valid Shadowsocks account, no Account no effect, can also be modified first, with the account number and then fill in.
Select the corresponding OpenWrt system written in the route, the official version is English, enter the password first, and then use the following operation to add SS and Han.
The corresponding tool software is WINSCP and Putty.exe

Compress the package within 4 IPK files, Chinadns and Shadowsocks-libev packages, 2 Luci files are their bounded bread.
Take it into 192. 168. 1. 1 in the TMP directory (with WINSCP),

Execute the following 2 commands (with Putty.exe software)
OPKG Update
Opkg INSTALL/TMP/*.IPK

The "Service" menu appears in the post-run routing interface with "hard-shrinking" and chinadns choices.

One. "Service" menu point ("Hard shrink")
In Add "Server Management" to fill in the effect of the server IP, port, encryption method.
Under Basic settings, select Transparent Proxy---Select the server you just joined in the drop-down menu. No other choice. Click "Save & Apply"

Two. Chinadns 2 Tick---Point "save & Apply"

Three. "Service" menu point ("Hard shrink")
Select "Service Control" ====== Direct point "Save & Apply"
this is important. (Not so will always walk agent or do not go agent, it should be a bug, tried for a long time.) )

Here are 2 different versions of the Chinese method
Chinese 15. 05, Chinese
Opkg Install LUCI-I18N-BASE-ZH-CN #装汉字的命令
Chinese 14. 07 Chinese
Opkg Install Luci-i18n-chinese #装汉字的命令

Convert Text---system---system----language-choose Mandarin (all the corresponding English system--system ...)

Just press a few menus to refresh the refresh to see Chinese.

The OpenWrt version in the package is 14.07 and 15.05, 2 versions, is the AR9341 chip, has been mistaken. Routing is not AR9341 chip is not available.

Compress Package http://down.51cto.com/data/2268477

This article is from the "Yangun" blog, make sure to keep this source http://162810.blog.51cto.com/152810/1881660

Fast Router FR300 modified OPENWRT system, plus SS, Chinese