Fast wireless router configuration method FAST FW300R detailed process of wireless router configuration, fastfw300r

Fast wireless router configuration method FAST FW300R detailed process of wireless router configuration, fastfw300r
1. physical connection of devices

A wired computer connects to the LAN port of the router, a network cable from the Internet connects to the WAN port of the router, and a wireless connection is set through the router to connect to the router through the wireless function. (For example)

2. establish correct network settings

2.1 set the IP address of the computer. Right-click "Network Neighbor"-"attribute" (for example)

"Local Connection" -- "attribute" (for example)

For example, click TCP/IP and then click "properties"

As shown in, set the IP address to "automatically retrieve IP addresses"

2.2 test order check whether your computer and the router are connected. Click Start> RUN> Enter CMD and click OK. Enter ping 192.168.1.1 In the CMD window and the result is as follows. It indicates that it is connected to the vro.

3. Set vro

Open the IE browser and enter the router address: http: // 192.168.1.1. You will see the logon interface shown in. You need to log on as a system administrator, that is, enter the user name and password (both the factory settings of the user name and password are admin) on the logon interface, and then click OK.

If the user name and password are correct, the browser displays the Administrator mode and a Setup Wizard Page appears, as shown in Figure 5, you can click the settings wizard menu on the left of the Administrator mode screen to activate it ).

After logging on to the vro, You can manually click the settings Wizard to set the settings.

Click Next To go to the Internet access mode selection screen. Here we will demonstrate the PPPOE dial-up Internet access method used by common household users. Based on your actual situation.

Enter the user name and password for broadband Internet access provided by the ISP in the interface as shown in.

After setting, click Next. The basic wireless network parameter settings page is displayed, as shown in.

Wireless status: enable or disable the wireless function of the router.

SSID: set any string to indicate your wireless network.

Channel: Set the wireless signal frequency band of your vro. We recommend that you use the frequency band 1, 6, and 11.

Mode: sets the wireless working mode of your router. We recommend that you use 11bgn mixed mode.

Bandwidth: Set the channel width used for wireless data transmission. Options include 20 M, 40 M, and automatic.

Maximum Transmission Rate: set the maximum transmission rate of your router's wireless network.

Disable wireless security: Disable the wireless security function, that is, the wireless network of your router is not encrypted.

WPA-PSK/WPA2-PSK: the encryption method of your router wireless network. If this option is selected, enter the password you want to set in the PSK password, the password must be 64 hexadecimal or 8-63 ASCII characters.

Do not modify Wireless Security Settings: If this option is selected, the parameters you set last time will be kept in the wireless security options. If you have never changed the wireless security settings, after you select this option, the wireless security will be disabled by default.

After setting, click Next. If you change the wireless settings, the setting wizard as shown in appears. Click restart to make the wireless settings take effect.

If you have not changed the wireless settings, the complete setting Wizard Page is displayed, as shown in. Click Finish.

Note that the above mentioned channel bandwidth settings only apply to network devices that support the IEEE 802.11n protocol. For devices that do not support the IEEE 802.11n protocol, this setting does not take effect.