When the speed is not stable, or network failure, a possible reason is that the router has failed.
Therefore, we need to understand some of the router fault detection methods and skills, when there are problems, they can easily do well, and do not need to ask people to deal with, it is not convenient and very waste of time.
Router failures, there are a number of methods that are usually checked:
1, to ensure that the control panel can be landed
Sometimes there is a problem with the router, you will find that the router can not log the control Panel, at this point, the "No Line by landing solution", I believe it can solve this problem.
2, restart the router
After several changes and restarts, the user's router profile may be corrupted. You might as well use a paper clip or something, an ammonium reset button on a router. If you can't find the encirclement button, refer to the router's manual. You should keep the reset button pressed for more than 30 seconds to return the router to its factory default value.
3. Upgrade Router software
Be sure to protect your router from running the latest software. You can download the latest router software version from the manufacturer's website.
4, check the signal and the location of the router placement
Make sure your wireless router is in the best position to achieve optimal performance. How do you do that? You may wish to move your wireless router until you reach a location where the signal is strongest. Do not put the router in a position near the wall, or you will send the signal outside.
5, the connection is not stable
If your connection is unstable, disconnected, and often reconnected, there may be interference or conflict, you should change the wireless router's channel to another try.
The above is a few basic router fault detection methods, through this check, basically can solve the problem.