Fdisk add partition caused by Linux error:22:invalid argument

[Email protected] ~]# echo "---" >/sys/class/scsi_host/host0/scan

[Email protected] ~]# fdisk-l

disk/dev/sda:584.6 GB, 584646328320 bytes

255 heads, Sectors/track, 71079 cylinders

Units = Cylinders of 16065 * 8225280 bytes

Device Boot Start End Blocks Id System

/DEV/SDA1 * 1 19441 156151808 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 19441 44937 204796672-up Linux

Partition 2 does not end on cylinder boundary.

/dev/sda3 44937 57685 102398336-up Linux

Partition 3 does not end on cylinder boundary.

/DEV/SDA4 57685 71080 107595584 5 Extended

Partition 4 does not end on cylinder boundary.

/dev/sda5 57685 70433 102398336-up Linux

/dev/sda6 70433 70949 4144768, Linux swap

/DEV/SDA7 70949 71080 1052288-up Linux

disk/dev/sdb:146.1 GB, 146156158976 bytes

2 heads, Sectors/track, 5947109 cylinders

Units = cylinders of * = 24576 bytes

Device Boot Start End Blocks Id System

/DEV/SDB1 3 5947064 142729472 Linux

disk/dev/sdc:107.3 GB, 107374182400 bytes

255 heads, Sectors/track, 13054 cylinders

Units = Cylinders of 16065 * 8225280 bytes

Device Boot Start End Blocks Id System

/DEV/SDC1 1 13054 104856223+ Linux

disk/dev/sdd:85.8 GB, 85899345920 bytes

255 heads, Sectors/track, 10443 cylinders

Units = Cylinders of 16065 * 8225280 bytes

DISK/DEV/SDD doesn ' t contain a valid partition table

[Email protected] ~]# FDISK/DEV/SDD

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF Disklabel

Building a new DOS disklabel. Changes'll remain in memory only,

Until decide to write them. After that, of course, the previous

Content won ' t be recoverable.

The number of cylinders for this disk was set to 10443.

There is nothing wrong with the, but this is larger than 1024,

And could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from the other OSs

(e.g., DOS fdisk, OS/2 fdisk)

Warning:invalid flag 0x0000 of partition Table 4 would be a corrected by W (rite)

Command (M for help): M

Command Action

A toggle a bootable flag

b Edit BSD Disklabel

C Toggle the DOS compatibility flag

D Delete a partition

L list known partition types

M Print this menu

n Add a new partition

o Create a new empty DOS partition table

P Print the partition table

Q Quit without saving changes

s create a new empty Sun Disklabel

t change a partition ' s system ID

U Change display/entry units

V Verify the partition table

W Write table to disk and exit

X Extra functionality (experts only)

Command (M for help): P

disk/dev/sdd:85.8 GB, 85899345920 bytes

255 heads, Sectors/track, 10443 cylinders

Units = Cylinders of 16065 * 8225280 bytes

Device Boot Start End Blocks Id System

Command (M for help): N

Command Action

E Extended

P primary partition (1-4)

P

Partition number (1-4): 1

Using Default value 1

Using Default Value 10443

Command (M for help): W

The partition table has been altered!

Calling IOCTL () to re-read partition table.

Syncing disks.

[Email protected] ~]# MKFS.EXT3/DEV/SDD1

MKE2FS 1.35 (28-feb-2004)

Filesystem label=

OS Type:linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

10485760 inodes, 20970841 blocks

1048542 blocks (5.00%) reserved for the Super user

First Data block=0

Maximum filesystem blocks=20971520

640 block groups

32768 blocks per group, 32768 fragments per group

16384 inodes per group

4096000, 7962624, 11239424, 20480000

Creating Journal (8192 blocks): Done

Writing superblocks and filesystem accounting Information:done

This filesystem would be automatically checked every mounts or

Whichever comes first. Use Tune2fs-c or-i to override.

[Email protected] ~]# More/etc/fstab

# This file was edited by Fstab-sync-see ' Man Fstab-sync ' for details

LABEL=/1/EXT3 Defaults 1 1

None/dev/pts devpts gid=5,mode=620 0 0

NONE/DEV/SHM TMPFS Defaults 0 0

NONE/PROC proc Defaults 0 0

None/sys Sysfs Defaults 0 0

Label=/tmp/tmp ext3 Defaults 1 2

label=/u01/u01 ext3 Defaults 1 2

label=/u02/u02 ext3 Defaults 1 2

label=/u03/u03 ext3 Defaults 1 2

Label=swap-sda6 swap swap defaults 0 0

/dev/sdb1/u03/flash_recovery_area ext3 Defaults 1 2

/dev/sdc1/u04 ext3 Defaults 1 2

192.168.4.21:/volume1/nfsforlinux/7222/mnt/nfsbak NFS Defaults 0 0

/dev/hda/media/cdrecorder Auto pamconsole,exec,noauto,managed 0 0

/dev/fd0/media/floppy Auto pamconsole,exec,noauto,managed 0 0

[Email protected] ~]# Vi/etc/fstab

# This file was edited by Fstab-sync-see ' Man Fstab-sync ' for details

LABEL=/1/EXT3 Defaults 1 1

None/dev/pts devpts gid=5,mode=620 0 0

NONE/DEV/SHM TMPFS Defaults 0 0

NONE/PROC proc Defaults 0 0

None/sys Sysfs Defaults 0 0

Label=/tmp/tmp ext3 Defaults 1 2

label=/u01/u01 ext3 Defaults 1 2

label=/u02/u02 ext3 Defaults 1 2

label=/u03/u03 ext3 Defaults 1 2

Label=swap-sda6 swap swap defaults 0 0

/dev/sdb1/u03/flash_recovery_area ext3 Defaults 1 2

/dev/sdc1/u04 ext3 Defaults 1 2

/dev/sdd1/u05 ext3 Defaults 1 2

192.168.7.63:/volume1/nfsforlinux/7222/mnt/nfsbak NFS Defaults 0 0

/dev/hda/media/cdrecorder Auto pamconsole,exec,noauto,managed 0 0

/dev/fd0/media/floppy Auto pamconsole,exec,noauto,managed 0 0

"/etc/fstab" 17L, 1285C written

[Email protected] ~]# mkdir/u05

[Email protected] ~]# mount-a

[Email protected] ~]# df-h

Filesystem Size used Avail use% mounted on

/DEV/SDA1 147G 90G 51G 65%/

/dev/sda7 1012M 34M 927M 4%/tmp

/dev/sda5 97G 78G 14G 86%/u01

/dev/sda3 97G 77G 15G 85%/u02

/dev/sda2 193G 165G 18G 91%/u03

/DEV/SDB1 134G 95G 33G 75%/u03/flash_recovery_area

/DEV/SDC1 99G 66G 28G 71%/u04

192.168.7.63:/volume1/nfsforlinux/7222

2.7T 1.9T 839G 70%/mnt/nfsbak

/DEV/SDD1 79G 89M 75G 1%/u05

[Email protected] ~]# chown-r oracle:oinstall/u05

[Email protected] ~]# chmod-r 775/u05

Fdisk add partition caused by Linux error:22:invalid argument