Features of the SDC15 of the mountain-martial locator

The Digitronik SDC15 is a small 48x48mm panel digital regulator with multi-range input and a new algorithm "Ra-pid" "Just-fitter" PID control, in line with the CE standard products. Up to 2 control output points, the number of points determined by the machine, you can choose from relay contacts, voltage pulses, current. There are two types of mounting options, the instrument panel mount type and the base mount type respectively. http://www.china-azbil.com/

The series of the mountain controller has the following features:

Compact body, 60mm thickness;

Panel section only 2mm thick;

Precision for the 0.5% FS;

The type of input has thermocouple group, thermal resistor group, linear group, can switch each other.

Control mode has on/off control, using Ra-pid + just-fitter PID control, Adaptive can choose one.

Heating and Cooling (heat/cool) control is achieved using 2 control output points and event outputs.

Through 2 external switch input points, you can set the set value (SP) switching, Run/ready switching, lock release and other 18 kinds of actions.

Current value (PV) correction.

Correspondence (3-wire RS-485).

Using the parameter key, you can log in 8 points, easy to operate.

Using the Mode key for Run/ready Auto/manual LSP switch, lock release, simple operation.

A maximum of 3 event output points.

In addition to PV, DEV, SP and other temperature events, you can also set the CT heater break/overcurrent, circuit diagnosis and other status events.

Complies with CE Standard (Safety specification en61010-1, EN61326).

With a computer programmer (sold separately), you can easily implement various settings such as installation, parameters, and so on, so that data can be logged in a single unit ~ 8 units.

Features of the SDC15 of the mountain-martial locator