First into the Raspberry Pi 1----Install system + ENTER SSH

In order to better engage in the programmer's career, pits Linux, to lay first-hand information for the learning brother, leaving the Linux training materials ...

-------is actually for a router///play ....

Into the Raspberry Pi 3b + Power + Enclosure +SD Card---300 ocean--------meat Hurts

Raspberry Pi 3b Power Consumption is still very large recommended to buy a 2A or more of electricity.

Split Line///////////////////////////////////////////

Raspberry Pi System installation + go to command line

Raspberry Pi Support Dozens of OS half of the novice recommended is Raspbian

Raspbian Latest System Image

Http://vx2-downloads.raspberrypi.org/raspbian/images/raspbian-2016-05-13/2016-05-10-raspbian-jessie.zip (preferably under FQ, otherwise it will be very slow.) You're going to use IDM when I'm not saying it.

The tools to use are:

1. Multifunction Reader one.

2.TF Card (8g/16g/32g can).

It's Win32diskimager to burn and write organs.

But there's a very serious drawback. The file path does not support Chinese.

Personal recommended USB Image Tool The lowest failure rate is version 1.7.

Plug in the card reader, burn write system to start!

?

1. Open the USB Image Tool

The upper-left corner is device Mode, not volume mode!

1. Rescan Select the extracted img file after download
2. Write to wait for the progress bar to complete.

Cause of error

1. USB Image Tool must be run with administrator privileges in the system above Win7
2. USB Image Tool operation requires the. NET environment to be loaded directly using the system default.

After writing, you can start the system, happy to play SSH!

Insert the write-completed SD card and plug in the power supply.

SSH management (no display device at hand//poor//)

1. The first time to enter the system directly using a network cable access to the router, the computer access to the same wifi.

In the router management interface look for the Raspberry party due IP address. Not going to route? You can also scan the LAN device to open the 22-port device, sorta.

1. Use the SSH management tool here, take putty as an example.

   Open the software and fill in the Raspberry Pi IP address.

   Default Login interface

   Enter the system default user name Pi password raspberry.

   Well, the familiar Linux command line is back!

   ?

   Next install the one-shape interface management tool to change the mirror address etc.

   With detailed initial Entry system configuration in http://blog.csdn.net/longerzone/article/details/36034619

   Thanks to the open source community for technology sharing!

?

?

?

?

First into the Raspberry Pi 1----Install system + ENTER SSH