Five steps to make a U disk DOS boot disk

Preparatory work:

A U disk, usboot making tools, a Maxdos compression package

After downloading the Ubsboot program to extract, and then put your U disk plug in, according to the following steps you can make a U disk into a DOS boot type (note that the backup disk in advance of useful data).

Specific steps:

Step One: Open the running Usboot (see figure below)

Click on the Blue Word selection mode of work, the recommended choice of Zip mode, zip mode refers to the U disk simulation into a Zip drive mode, after the launch of the U disk Letter is a:

Step Two: Click "Start" and start making. When the following dialog box appears, make sure that the data on your USB drive is useless, and then select "Yes".

The third step: the launch disk when the following prompts appear, please press the normal procedure to unplug the U disk:

Win9x system: Can directly unplug the U disk

Win2000, XP, 2003 System: Please double-click the red circle on the right of the taskbar, "Security removal Hardware" icon (pictured below), normal uninstall U disk.

Fourth step: Plug in the U disk again, later will appear the following success of the hint, that your U disk is now able to start the basic DOS, click on the upper right corner of the X close Usboot.

Fifth step: The front download of the Maxdos compression package, the inside of all the files released to the root directory of U disk, note must be the root directory! So far, you've got a nice dos boot drive.

Use the U disk DOS boot disk to start the computer: the USB disk is inserted into the motherboard (preferably with other unrelated USB devices temporarily unplugged), restart the computer, in the System self-test interface Press del key into the BIOS

Setting: Press the "Del" key to enter the BIOS when the boot is on, one is the boot Sequence (boot order) set to Usb-zip (or USB-HDD, USB-FDD, please work with your production of U disk working mode corresponds) first, or selected "Advanced BIOS Features "Enter, in the" "" "The" "Device" "" "" Usb-zip "," Second Boot Device "with the page key to select" HDD-0 "Press" F10 "key to save, press ENTER to confirm exit. If your computer BIOS does not have "usb-zip" items, you can not use a U disk to start the computer. You set the method by pressing the PageUp or PageDown key on the item to convert the options. When set, press ESC, return to the BIOS main interface, select Save and Exit (save and exit BIOS settings, press F10 directly, but not all BIOS support) Enter to confirm exit BIOS setup.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join