Five tips for canceling Win7 computer boot automatic detection hard drive

Reason analysis:

1, there may be illegal shutdown caused by, for example, direct power;

2, the hard drive appears bad road will also appear on the automatic detection of hard disk phenomenon.

3, and the hard disk partition format, FAT32 format in the illegal shutdown will be on the power-on when the request to detect the hard disk, and must be detected in the next boot will not be again detected, you can see in the system a file recorded in the detection is the end of the information, Sometimes, even if the detection is complete, it will be checked again on the next boot because the file is not updated.

　　Solution:

Method One, or you in the BIOS setup to select every boot to detect the hard drive, and your computer configuration is not related. The solution is to press Del to enter the BIOS after power-on, select quick power On Self test (Fast power-on self-test), your must set to Enabled, select Disabled, turn it off on the line.

Method Two, if the partition is the FAT32 format, it is recommended to convert it to NTFS, the action is to open a command prompt and enter: Convert X:/fs:ntfs, enter;

Method Three, if it is due to abnormal shutdown, if you skip every time will still run, if it is not such a reason to check the state of the D disk is normal, fixed the hard drive error, the specific method is: Click "Start" → "run" in the window, enter "chkdskx:/f" ( X is the disk character, this command can check for logical errors in the file system. and repair, and then start "Disk defragmentation" to defragment the appropriate disk, you can eliminate the disk scan again, it is possible that the hard drive has a bad way, the easiest way is to back up the D-disk data, Then format the D disk so that you can use it properly.

Method Four: Modify the registry, open the registry, navigate to [Hkey_local_machine/system/currentcontrolset/control/session Manager], and locate the "BootExecute" in the right-hand window. : REG_MULTI_SZ ", the key value is windows about disk scan, double-click" BOOTEXECUTE:REG_MULTI_SZ "to change its contents to:" AutoCheck autochk * ", enter can return to normal state, or delete all of the numerical data in it, so that you can completely prohibit illegal shutdown and restart when the disk scanner.

Method Five, open computer and then right-click X Disk Select Properties-Select Tools-"Check out" midpoint "Start Checking"-select "Automatically fix file system errors" and "scan and attempt to recover bad sectors", then click "Start" for scan repair;