Flash: laser writing

Flash: laser writing
1. Add a graphical component and draw a beam.

2. Return to the scenario and add three layers, as shown in the following figure.

3. Set the top layer as the guiding line layer and the bottom layer as the guiding layer.

4. Enter a letter at the bottom layer and adjust the size.

5. Draw a guide line with a pencil tool on the guide line layer. Add a key frame at 15th frames.

6. Drag the light component just made in the first frame of the guided layer. Add a key frame to 15th frames and set the first frame as the motion.

7. Lock the layer above.

8. Scatter the letters at the bottom of the layer, add the key frame, and erase the key frames.