Flash make Buddha Effect

The first step: change the background to black, click Insert menu-Select Insert Component-the effect is as follows:

Figure 1

The second step is to follow the steps shown below:

Figure 2

2Flash Example: To build a Buddha effect tutorial

The third step is the following figure:

Figure 3

The fourth step is the following figure:

Figure 4

The following results are obtained after the fifth step is repeatedly made:

Figure 5

Sixth step: Operate the following figure

Figure 6

(Hint: only when the line is converted to color gradient, otherwise you can only fill in monochrome)

3Flash Example: To build a Buddha effect tutorial

7th: The operation of the following figure

Figure 7

Eighth step: Back to the scene

Figure 8

Nineth Step: The Layer 1 command to Buddha 01: The following figure

Figure 9

Tenth step: Operate the following figure

Figure 10

4Flash Example: To build a Buddha effect tutorial

11th Step: Operation as follows

Figure 11

Step 12th: Insert two layers into the keyframe at 40 frames, and follow the illustration below

Figure 12

Step 13th: Select the frame in the middle of the layer. Right click on the above, select Create motion tween, as shown below

Figure 13

Step 14th: Right-click on the Mask layer to select the mask, as shown below

Figure 14

OK, now you can press Ctrl+enter to see the effect!