FLASHFXP Connection Prompt connection failure (10061: Connection denied) and list error

Connection failed (10061: Connection denied)

WinSock 2.0--OpenSSL 0.9.8h 2008
[right] is connecting to 115.238.xxx.xxx-> ip=115.238.xxx.xxx port=21
[Right] Connection failed (10061: Connection denied)
[Right] is delaying 120 seconds and will try to reconnect for the 1th time
[Right] has given up trying again
[right] is connecting to 115.238.xxx.xxx-> ip=115.238.xxx.xxx port=21

This problem, not the FTP problem is not a server problem, is my server installed the reason for selling coffee, I

Selling coffee-> Access Protection Properties-> Universal Maximum protection-> prohibit FTP traffic and prohibit HTTP traffic to the ban, the cancellation can be resolved.

As shown in figure

Connection denied list error

This error occurs because the passive mode is not removed, just remove the FLASHFXP passive mode.

As shown in figure

Open FLASHFXP, Options-"Parameter Settings-" connection, in the connection to the selected video card to remove the "Use Passive mode" in front of the check, to determine the resolution of the FLASHFXP data Socket error: Connection denied error