Flying Fish Star Router bridging setup steps

In a wireless environment, sometimes we in order to expand the coverage of the wireless network, you can use bridging the way to connect, I believe there are a lot of bridges are not very understanding, today we have an example to introduce the steps of bridging, you see, you can do it on their own bridge.

　　One, since the bridge, of course, to use two routes, here we have to two flying fish star without the origin of the bridge, first into one of the routing settings, this route is called a.

1, login A router settings page, click into the running state, mainly check the ADSL status of the PVC open, see PVC0, PVC1 These two opened no, others should be closed.

2, click into the system mode, select the wireless ADSL routing mode, the default routing interface in accordance with your broadband operators Select, click the LAN port settings, IP address set to 192.168.1.1, Subnet mask: 255.255.255.0, then save, the focus is to copy the MAC address, this is very important, in the configuration of router B to use,

3, click the WAN port settings, WAN connection type choose PPPoE, Internet account number and password to fill in your broadband operators to provide data, connection mode to choose Automatic Connection, save, and then enter the advanced settings, will manually set the DNS server tick, and then set up a DNS server IP address, save exit, This DNS server IP address you can ask your broadband operator or go online to check telecom or Netcom/Unicom IP in your local DNS server.

4, click to enter the basic settings, the SSID to fill in a name you like or but change also line, channel to specify a good channel, preferably set to 11 below, convenient old-fashioned wireless network card can connect, turn on wireless function, open SSID Broadcast, open the WDS bridge function, AP1 MAC address fill router B LAN port MAC address, save exit.

5, wireless security settings, here you can choose to turn off or enable, if you want to enable, you must use router A and router b the same security settings, passwords must be the same, enable security settings, the computer connection router must choose the same encryption type and enter a password to connect to the router and the Internet.

6, click into the DHCP server, click into the DHCP service, choose not to enable, save exit.

　　Second, b router settings, login router Settings page, and a router settings, please refer to settings, in fact, do not have to set the line, click into the system mode, select No line by mode, this is different from a router, please note.

1, click LAN port settings, IP address set to 192.168.1.2, subnet mask: 255.255.255.0, then save, the focus is to copy the MAC address, this is very important, back to configure router A to use, WAN settings do not have to set.

2, click to enter the wireless settings, click to enter the basic settings, take out just set a router copy of the note or raft, the SSID to fill in a router's SSID number, that is two routers must be the same SSID, channel and a router the same channel, open wireless function, open SSID broadcast, Turn on the WDS bridging function, AP1 MAC address to fill in router a LAN port MAC address, save exit;

3, wireless security settings, and a router's form, repeat a bit is the encryption type, password two routers must be the same;

4, click into the DHCP server, click into the DHCP service, choose not to enable, save exit.

　　Third, here on the completion of the setup, we can test, from the notebook to run the command line, enter Ping 192.168.1.2, there is data returned the network is normal, if the display timed out is wireless network is not set up, please carefully check the network settings of two routers, In particular, if the security settings are the same, if from a laptop ping 192.168.1.2, ping 192.168.1.1 from the B laptop can return the data normally, the bridge has been successful.

In fact, bridges only play a role in relaying, similar to the relay, the ultimate goal is to guide the B-notebook computer to point a router as a gateway to the Internet, the process of the B-router WAN is no data traffic, you will b laptop gateway to a router, and then connect the B-Router wireless network, Access to the Internet is a proven success through bridging the Internet.