360 smart camera usage illustration

1. 360 smart cameras must be connected to the network, so we need to know their combination in advance. Let's take a look at the networking diagram below. We can refer to the following structure for networking.

The networking structure is like this, but 360 smart cameras must be connected to the network to view the monitoring screen through 360 Home Guard at the other end of the network.

2. 360 smart camera networking requires the combination of indicator lights.

3. We installed the 360 Home Guard mobile APP on our mobile phone. Then we took out the instruction for the smart camera you purchased and scanned it.

4. After the APP is installed, you need to bind the camera. In the Home Guard APP, select Add camera. Note: add a local camera at the top, and add a shared camera at the bottom. Generally, select a local camera.

5. Next, the system will send a voice prompt asking us to check whether the camera is currently flashing green light. If there is no error, click the button below and select "the green light is flashing.

6. Next is a key step. You need to remove a small metal pin on the inner page of the instruction manual and insert it into the "Set" hole behind the camera, keep pressing until you hear the sound of "voice", and then click "hear prompt" at the bottom of the APP ".

7. Later, the APP will ask you about the SSID and password of the currently used WIFI, and then a test button for "sending sound waves". After you click it, a message indicating success will be displayed, at this time, when the camera sends a voice prompt saying "the received audio wave information is successful, please click Next", and the recognition is complete. At this time, you will also find that the camera indicator starts to turn blue.

8. Next, you can add a description to the smart camera for easy differentiation.

9. After the settings are complete, your 360 smart camera will be ready for use.