64-bit Windows Vista system four installation methods

What is the difference between a 64-bit Windows Vista operating system installation and 32-bit? Well, how about the installation? Here are four ways to do this.

One method of hard disk installation Vista64 bit system

64-bit Vista installation from hard drive under 32-bit system

1, with virtual CD-ROM software will vista64 bit of DVD image files in the Boot folder, EFI folder, bootmgr files, extract to c\:

2, under the C:\ New Sources folder and extract vista64 image sources under the Boot.wim into the inside, there is a file is Bootsect.exe (can not use vista64 that, to a 32-bit on the OK, I'm going to download your 32-bit bootsect.exe to C. And then copy all the files from the virtual optical drive to where you want to go. For example, D:\VISTA64 file ready, into the installation phase, running CMD into the c:\bootsect/nt60 C: Enter. Restart Computer > enter the installation > the first interface is for you to choose the language (direct next) > see the installation of the words do not ah? Please look at the bottom left corner of the interface there is a repair computer > select after > Continue > Command > enter the interface like DOS: Enter the C disk Delete

Del Bootsect.exe

Del bootmg

del boot

Del EFI

del sources

Delete completed into just copy VISTA64 bit of the installation disk D:\VISTA64\SOURCES after the setup is ok the back of the I said

Method of two full hard disk installation Vista64 bit system

Use the virtual CD-ROM to VISTA64 the boot folder, the EFI folder, the Bootmgr file in the DVD image file, and copy to C:\ Create a new Sources folder under C:\ and copy vista64 image sources under the Boot.wim to your face, there is a file is Bootsect.exe (can not use the vista64 that, to a 32-bit on the OK, I'm going to download your 32-bit bootsect.exe to disk. Then copy all the files of the virtual CD-ROM to the place you want to put. For example, D:\VISTA64 files ready to go into the installation phase, run cmd into the C:\ input bootsect/nt60 C: Enter. Restart Computer .> into the installation > The first interface is called you select the language (direct next) > see the installation of the words do not ah? Please look at the bottom left corner of the interface there is a repair installation (may be fixed what something not too clear) > select > Continue > Command > Into a DOS-like interface: Enter the C disk delete del bootsect.exe del bootmgr del boot del sources delete completed into the previous copy VISTA64 bit of the installation disk D:\VISTA64\SOURCES after set Okay, the back is OK, I don't need to tell you.

Method of three-pure hard drive installation 64-bit Vista

1, first install WinPE2.0 New Year edition

2, with the daemon virtual Vista64 bit of the ISO, the inside of the sources directory to copy to C disk, covering the WinPE2.0 New Year version of the sources below Boot.wim, so that the start up is 64-bit WinPE

3, reboot, enter this 64-bit WinPE

4, into the command line prompt "is the DOS command line mode" (will not look at the tutorial, very easy)

(Why do you want to get in here?) because you are installing directly, you will be prompted "missing the required CD/DVD drive device driver" error prompts.

5, the key step! Now the current directory is x disk sources, right? Go to the sources under C "no?" please, you might as well learn some DOS commands and see this post.

The command line prompt is: c:\sources>

6, in fact, each step is an important step ~ ~ This time input Mrt.exe carriage return "C:\sources>mrt.exe carriage return"

7, the most important step: will find out what is the language of the program (as if it is Mongolian), regardless of him, hit the hook "is agreed to the agreement", began to install, anyway, do not understand, have been pressed next until the installation is complete.

8, after the installation of the above Mrt.exe, run Setup.exe start Vista64 bit installation!

(Why do I have to install Mrt.exe first?) I do not know, anyway, do not install Mrt.exe words, you run Setup.exe will prompt "Missing CD/DVD drive device Driver", cannot be installed.

9, the rest is needless to say, the input serial number, select version, it will start to install the ~ ~

Method Four installs the 64-bit Vista method (32XP)

The virtual optical drive is under XP, XP is a 32-bit system, so that the result of the operation is equal to the XP below the upgrade to 64-bit vista, which is absolutely impossible.

To find a DOS version of the support of the ISO, there are the next I forget to go * * Look for: here:

Download three files: loadiso,smartdrv,vfloppy

1. Copy our boot CD image (ISO file) into the hard drive (except for any disk other than C disk)

2. Run the self-extracting file Vfloppy.exe, select the directory on it, D:\BOOT

3. Extract Loadiso.rar, get file LOADISO.exe, and then use, winrar decompression LOADISO.exe, get Loadiso.ima (ignore error prompts), Add Loadiso.ima to the Dudu.zip file and delete another file in the D:\BOOT\dudu.zip directory.

4. Copy the Smartdrv.exe file to the D:\BOOT

5. Reboot the system, when completing the BIOS detection, press ALT key to activate the bootstrapper, select "Start emulation virtual

The boot menu appears after the floppy drive, enters the first "launch ISO CD Mirroring Installation Wizard", and then selects the partition and ISO file where the ISO file is stored to load the ISO disc image with the letter "Z"

6. Load Smartdrv.exe to speed up installation. Note SMARTDRV only supports FAT format!

NTFS-formatted friends can be used with PQ and other tools to convert the format, or install a day can not finish!