Adobe Photoshop Lightroom Quick fix Drawing Tips

1. Use brightness to improve the sky

On a clear day, you may find it easy to make a beautiful blue sky. Unfortunately, if the camera in the shadow is guaranteed to be exposed correctly, the sky tends to get out and lose a lot of detail.

In Lightroom, you may have the first thought of using saturation to enhance the sky, but this is not the best choice. Saturation can have an effect on the overall color and may lead to unpredictable results. On the other hand, saturation is a tricky setup that can easily disrupt the tone of the sky and other positions.

With the HSL panel open, you can have separate hues, saturation and brightness sliders for each color, providing you with more precise control. However, saturation is still not the best option, even if only minor adjustments may be made to the picture as a cartoon.

A good alternative is to use the Brightness slider. This option, like its literal meaning, lowers the brightness of the blue, creates a darker, more visible sky, and does not affect areas that are not blue.

2. Adjust the brush

The adjustment brush in Lightroom is a great tool that allows you to adjust to any one of the selected areas. The biggest advantage of this feature over Photoshop is that its modifications are non-destructive and can be edited at any time, even if more than one adjustment brush has been applied to the overlay.

This makes this tool very useful. Not only can you combine several different brush effects, but you can also copy the same brush to enhance the effect. For example, to produce the appropriate blur in a lightroom, it is usually to adjust the "sharpening" in the brush to-100. However, this only produces a slight blur, so you must copy the brush several times to achieve strong results.

The basic operation of this tool is to select the brush, adjust the settings, and then "smear" the effect. Repeat this step if necessary until you are satisfied with your results.

After you have created multiple brushes, you can also edit them individually. Each brush will produce a dot on the diagram, click the dot to see the adjustment options.

3. Fast Skin Repair

There are too many skin problems that may appear in the photos. I live in the hot desert area of Phoenix, so the photos taken outdoors make people look very red and full of scars, and dry weather can cause great damage to the skin, so a lot of repair work is needed.

In this photo above, I use my favorite technique for dealing with skin. Let me give you a quick introduction to each of these techniques, and then you can combine them freely. Remember to be conservative in your operations, and a lot of subtle changes can make a big difference.

First, try to adjust the brightness. If the person's skin is dark, red, then first to improve the brightness, so that the color more natural. At the same time, it will eliminate some details, such as wrinkles or pores.

Next, find the Brightness slider again. Here, we increase the brightness of red and orange. This improves the brightness of the skin but does not destroy the natural effects, especially the darker and redder parts.

Lightroom has a built-in feature to achieve our goal: "Soften the skin" to adjust the brushes. Silky skin brushes can reduce the sharpness of selected areas and eliminate wrinkles and other skin problems.

As shown in the following illustration, the sharpness is increased in the default settings of the silky skin brush. I think a better choice is to reduce the sharpness and sharpness at the same time. Remember that we always have to modify the default settings provided by the software.

My last move is "reduce noise", which is a very common feature in photos taken with high sensitivity.

In order to reduce noise, Lightroom will slightly blur pixel points. I noticed that this was a quick way to soften the skin. But before you do this step, you need to think twice, first because it's a global adjustment that lowers the overall detail of the picture;

Sometimes it is acceptable to lose minor details. After you've finished, carefully contrast the front and rear effects, and make sure you're beautifying the photo rather than destroying it.

4. Cropping Reference line Overlay

Cropping a photo in Lightroom looks simple, but there are some hidden features that you can't miss. One of the most important things is to change the reference line of the cropping overlay.

By default, a line box with a three-point rule appears in the cropping interface so that users can use the three-point rule.

In fact, there are 6 different cropping guides built into the Lightroom. You can switch between 6 guides by pressing the "O" key on your keyboard.

To see all the Guide options, click on the "Tools" menu and see and choose from the "Crop guides overlay" menu.

5. Sync multiple camera shooting time

One of the easiest things to forget when you're shooting with multiple cameras is to sync the time taken. If the input time of the picture is disordered, it may cause confusion when classifying.

Fortunately, Lightroom provides a solution. This process is a bit tedious, but as long as you have mastered the process, you can do it in 1 or 2 minutes. First look for 2 photos, from different cameras, the closer the shooting time the better.

After you find 2 photos, select one of them, and then view the metadata panel on the right. Here, you can see the time of the selected photo and write it down.

Next, filter the pictures in the gallery and show only a single camera shot. You can select different filters in the upper-right corner of the gallery panel. With the Meta data filter, you can select a specific lens or camera to filter out photos from a particular camera.

After applying the filter, find the other photos taken at the same time as the photo you recorded. Select a picture, and then press the shortcut key CTRL + a all selected.

Finally, click on the metadata panel to take the icon to the right of the time item and call out the window below. Here, fill in the time you write down, Lightroom will automatically change the time of the other selected photos.

6. Separation tone: Retro effect

Separating tones is a way to add dramatic effects to a photo. But if you are unfamiliar with them, it may be a bit of a trap to operate.

In the current photography and design style, many people like retro effect. In recent years, I have created and downloaded countless retro effects for Lightroom, which are very similar in their split tones. Note the position of the high light and shadow hue sliders in the figure below.

Also you need to change the saturation and balance slider, depending on your photo. I suggest you try something more: see what happens in different places.

Keep in mind that this is just a quick little trick with no strict rules. The slider settings given above can produce a natural retro style of the the 1970s.

7. Weakening preset files

We all like Lightroom files. Just a little bit, you can make a picture anew. Who can say no? However, there is an unavoidable problem with preset files that are built into the software or found on the web-they are too powerful. In most cases, you'll like some kind of effect, but it's best to weaken it a little.

There are some ways to do this in the default functionality of Lightroom, but they all have some problems. The first is the most obvious solution: to change each slider setting in person. Another popular approach is to import the original and edited images into Photoshop, merging 2 layers with different transparency.

These 2 methods take time, and if Adobe can provide a weakening command as it does in Photoshop, there's absolutely no need to do so much work. Fortunately, some of the same troubled third-party developers came out.

Jamo Heikkinen, on his website Knobroom.com, has released a lot of great free plug-ins. One of them is called

As the "The Fader" plug-in, it provides the ability to weaken Lightroom preset files.

Download and install the plugin, select the Fader plugin through the menu, and you can see the following window to operate.

8. Highlight Display

It's a feature I've known for a long time, but often forgets. Any time you want to focus on just a few specific photos, you can use the highlight feature to hide other unselected photos.

First select the photo, and then press the "L" button on the keyboard, you can see the screen darkened, and then click, the screen will become All black.

The shortcut key is also available under the modified Photo module.

9. Individual mode

Although the Lightroom interface is already efficient, there are a number of settings, especially in the photo module. When these panels are expanded, it is difficult to quickly find the one that is needed. Also, it takes a lot of time to open the closing panel frequently.

Fortunately, we also have a separate model. In this mode, when you click to open a panel, the Lightroom will automatically put away the other panels, so that the entire panel area to maintain a refreshing interface. Once you have tried it, you will not cancel it again.

To enable individual mode, click the right mouse button on the Panel menu and select a separate mode in the menu.

10. Useful shortcut keys

At the end of this article, let me enumerate some useful shortcuts. Like Photoshop, Lightroom also supports a number of shortcuts, some of which will appear in the menu, but not much more.

Caps keyboard Lock key-in the enlarged view of the gallery, open Caps LOCK key, and then use the keypad numeric keys to add stars to the photo, the success will automatically jump to the next photo. If the lock key is not turned on, it will not jump.

Gallery-In the Gallery module, the G key can switch to Grid view, E switch to enlarged view, C switch to comparison view, n switch to Filtered view, and D to open edit mode.

Switchboard-use F5-F9 to quickly open or close individual panels in the operating interface.

Alternative-in the gallery module, by pressing the ALT key, you will notice that the "import" and "Export" buttons in the lower left corner become "Import directory" and "Export directory". The sharpness and brightness in the quick change photos panel will also become sharpening and saturation. "

Slider Reset-the slider can be restored to its original state by holding down the ALT key and clicking on the panel name in the Modify photo module. The same effect can be achieved by double-clicking the slider.

Quick play slide-in grid view, select a photo, and then press the Ctrl+enter key to start the slide show from this photo.