Airport Express Mac settings tutorial

Source: Internet
Author: User

 

Nat network address translation. Network Address Translation protocol.

To reduce the demand for IP addresses. If a device (such as a router) supports Nat, you can use a group of IP addresses (IP sharing) for multiple hosts. This reduces the need for IP addresses.

Atur-non-synchronous digital user Lu [ADSL] Termination Unit-Remote (that is, the ADSL data machine provided by telecom companies)

AP (access point, Network Bridge)

Pppoe stands for Point-to-Point Protocol over Ethernet. It is a type of network card that users only need to install on their personal computers, and then connect to the telecom line provider and Internet service provider (ISP) after applying for a broadband service, you can connect to a high-speed broadband network through a broadband connection device (such as XDSL and cable) to enjoy the high-speed broadband Internet access service. Pppoe is easy to use. The installation and operation methods are similar to those of modem dial-up networks. In addition, pppoe is also used to authenticate users on the ADSL Network Architecture, record user connection times, and obtain Dynamic IP addresses.

---------------------------------------------------------------------------------

Airport Express allows you:

‧ Set a new network for wireless computers to communicate with each other. If you set Airport Express as a base station and connect it to the Internet, wireless computers can also share their Internet connections.

‧ Connect your Airport Express to your current wireless network.

‧ Connect your Airport Express to your current AirPort Extreme or Airport Express network and use Airport Express as a wireless bridge to extend the communication range of an unlimited network (called WDS, wireless distribution system ).

The above is the instruction PDF file taken from the accompanying Airport Express Cd (25th page ).

---------------------------------------------------------------------------------

The following figure shows the screenshot taken by the younger brother from windows. If any error occurs, please correct it. Thank you.

(I just installed Windows management tools. After a few operations, I found that setting Airport Express on Mac is really simple ...)
 
‧ Run the "Airport Management Tools" on the Windows System (this program is from the security CDs Attached to the Airport Express host ).

‧ The main character window is the base station selector. If it is not set, you will see at least one Airport Express or your base station is the AirPort Extreme base station.

‧ After selecting the base station you want to set up, click "set" button on the hosts page to manually set the hosts plane.
 

 
‧ Set the "XXX" base station hosts to show basic information such as the base station name, website. 

 
‧ Start setting up your airport network.

‧ The greater the value of the "Multi-Point sending rate" option, the higher the efficiency of the Failover, but the smaller the number of non-online connections.

‧ In "Mode" selection, please set according to the non-existent network card specifications you selected.

‧ "Exclusion using dry links" indicates that if you use a non-preset parameter of more than 2.4 GB in your quota, it is recommended that you check, I don't know whether to influence the quality of online products.

‧ The option "Create a blocked network" is to set whether or not you can use the base station on the client side if you attempt to create a disabled network base station, you must confirm the network name when using the terminal to connect to the non-existent network base station. (check whether your network name is correct ).

‧ If you are using Airport Express to share your website, please use the base station in the airport network group: it is set to "establish a non-linear network", as shown in the following figure:
 
 
‧ Connect your Airport Express website to the existing "unlimited network", and select "add existing 」. 
 
‧ Click "Security Protection" to display the "Network Security" window, which is used to set the security protection for your non-existent network base stations, the younger brother selected "WPA for the family/small community office" in the third region 」. 
 
‧ Set "Security token" according to your needs 」. 
 
‧ Airport selection, which determines whether or not the role information is directed to the host and website. 

 
‧ "Internet connected platform", which is the place where your base station is connected to the Internet. 
 
‧ There are three options in the "renewal method.

‧ If your connection method is atur (ADSL digital server) → Hub (collector or zookeeper sharer) → Airport Express, use the "" method, and set the IP address. You must use the "Manual" or "DHCP" method. In the DNS server section, you can set the IP address (for example, the shard) of your shard ).
 
 

 
‧ If your connection method is atur → airport expres, and your network path is pppoe, in this case, select "determine the point of location (pppoe) through the Ethernet )」. Set your "Registration Name" and "registration name secret", and use Airport Express to help you perform the shopping festival. 

 
 
‧ If you select the "Airport (WDS)" option, you need to configure the "security risk assessment" option in "Airport Weather Events. 

 
‧ The network operator is used to determine the allocation of the IP address of the power station connected to the base station. 

 
‧ [Local port ", that is, when you set the corresponding ports for various services provided by your Nat server.


‧ Other zookeeper:
 
 
 
 
 

‧ Finally, after you complete the settings, please [update] to send the new settings to the base station.

‧ For more information, please refer to the "Airport description" in the drop-down list "Description" in "setting up XXX Base Stations 」, he knows more clearly.
 

---------------------------------------------------------------------------------
I know, in the Windows operating system, the settings provided by airport management tool are as follows. If not, please send them for repair, or ask the providers. 


**************************************** **************************************** ***********

※In a short time, you cannot write two articles... If you need them, please do so.

In
Set your airport on MAC (OS: Tiger)
 

---------------------------------------------------------------------------------

Many people see that Airport Express has been highlighted after Airport Express is added, but the Mac client seems to be somewhat mixed, in fact, it's very simple ......


The younger brother provides some technical support here. If you need it, please submit it. (Chinese Simplified Chinese Version ).

Bytes ---------------------------------------------------------------------------------------------------------
‧ Select a drop-down list directly from the airport display point on the bar and enter "Open the Internet browser program ...」 
 

‧ The following plane is displayed: 
 
‧ Make sure whether the airport source is on or not. If it is not on, it will be ineffective.

‧ "Network:" If you have multiple non-existent network base stations, please select a correct non-existent network base station.

‧ Basic platform ID Recognition: "I think this is the MAC address of the airport's internal network card.


‧ Open the "network" settings in the "Internet and network" group of "system preference settings.
 
 

‧ We can see such a plane. If the circle is okay, the small circle in front of it will certainly be dark. 
 

‧ Click the "Settings" button in the upper-right corner, or switch "Instructions:" to "Airport" to start setting your airport and network. In this example, "root setting, add:" The younger brother uses the "auto-motion mode 」. 
 

‧ In "TCP/IP", you can set how your computer (MAC) gets the IP address.

‧ The younger brother uses the "DHCP" mode. If "DHCP user recognition" is set in your Airport Express, you must enter the correct information, click Update DHCP lease to obtain the valid IP Address Settings.

‧ The younger brother has not set up the DNS server and search for the domain, because the DNS server has been set up in Airport Express, the client will be automatically used.

‧ As for "Configuring IPv6", the younger brother did not use it, so he did not touch it.
 
 

‧ "Pppoe" is probably a problem that many people may encounter, or forget to set it. You may have used Mac computers directly to connect to the Internet through pppoe,
After Airport Express or a shard, forget to turn this feature off, so that the power on the computer can be connected through pppoe. However, because this service cannot be connected to the requested ISP Server, it is impossible to obtain the IP address through the authentication.

‧ If you have added an Airport Express or a local Shard, please cancel the token of the attacker on this page.
 
 

‧ "Appletalk", the younger brother does not have an apple domain, so no setup is made. 
 

‧ "Proxy Server" should be known to anyone who will use it, namely, Proxy Server login, most of the people who use ADSL at home now should be provided automatically by the ISP industry, and there will be proxy server functions without any need to set. If you renew your account within the company or the school host, the client may be required to access the website, you must set the part of the proxy server. 

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.