1. File-->page Setup
Printer paper A column is the printing paper settings, no longer wordy.
The main is the scaling column: ScaleMode selection: Scaledprint
The following scale fills 1, which represents 1:1 of the proportional print. such as 1:
2, then click the Advanced tab in Figure 1 to enter the print content settings.
Under the Printout&layers project, remove the top overlay (right-click-->delete)
The following is shown in Project Setup 2.
I do the general is a single-layer board, so, generally only keep bottom layer.
3, finally also set the color of printing.
Printed PCB must be the darker the better, so that the effect of heat transfer will be better.
Click the Preferences option in Figure 2 to enter the dialog box.
Set the contents of colors & Gray scales. Printing black and white PCB is mainly grayscale setting.
Find what you want to print and set it to the black. As shown in 3.
Well, Setup is complete so you can print it directly file-->print
Altium DESIGNER6 Print PCB Setup