Amd xp SP2 settings

The desktop computer in the home is always inexplicably automatically restarted. The error message is 0x0000009c (0x00000004, 0x80546ff0, 0xb2000000, 0x00070f0f). The second group of digits in the brackets will change, sometimes it is 0x8054e370, and the other groups of numbers remain unchanged. I found this problem on the Internet and found that it is still a common phenomenon, even if all the drivers are updatedProgramIt is still useless. Although many people have problems, there is no good solution. The following is a good solution that I have summarized based on various documents:

1. The first group of numbers 0x0000009c indicates that the system has found an unrecoverable hardware error, which may be a memory problem. This may be caused by hardware reasons. You can change the memory for testing. If the memory is damaged, you don't have to look at it. If the problem is software, continue.
2. All the machines that encounter this problem use amd cpu. The range is roughly between 2500 + and 3400 +, and sempron and althon64 both have, windows XP SP2 and later operating systems are all used.
3. Automatic Restart is performed because "Automatic Restart" is selected in System Properties> advanced> Start and fault recovery ". You can remove this check box.
4. If your system has activated the cool 'n' quiet technology, disable it. This technology is unique to AMD. You can change the BIOS settings. This technology has some requirements on memory. In about half of the cases, disable this option to solve the problem.
5. If the problem persists, find the boot. ini file in the root directory of the system disk, with "/noexecute =". If the parameter is optin or optout, change it to alwaysoff. So far, most of these errors will not appear again.