The detailed setup steps for the Android terminal to connect the wireless signal to the Internet are as follows:
The
first step, on the mobile desktop to find
and click the
settings icon, as shown in the following image:
Note: There are differences in the interface styles of different manufacturers, this article introduces the original Android ecological settings.
second step , in the
settings
menu, find
Wireless and network , click
WLAN, as shown in the following image:
step three , after opening the WLAN wireless switch, locate and click the router signal in the list of displayed signals. As shown in the following illustration:
Note : The signal name is set SSID, if you do not confirm the signal name, you need to connect the router through the wired computer, through the browser into the management interface, click
Wireless Settings
>>
Basic settings to view
SSID, click Wireless
settings
>>
Wireless security settings
to view the wireless password.
Step three : Enter the wireless password, click
Connect . To avoid entering password errors, it is recommended that you check the
password . As shown in the following illustration:
Step Fourth , locate the wireless signal in the WLAN list and show that it
is connected . As shown in the following illustration:
Indicates that the phone is connected successfully, and you can try the Internet at this time.
