ASUS A43S installation of Windows 7 system issues

The system will reinstall the Windows 7 system because of the system's own DOS.

System installation Win7 32bit system full version installation, the system installed after the driver problem, a SM bus is interchip Drive, PCI simple communication device driver is Mei drive Intel Management Engine Interface, It should be an interface program that Intel has developed for some programs, and other reader-driven graphics drivers are good, but the Asus laptop has a drive that is unfortunately 64bit driven and incompatible with the 32bit system.

Later to www.asus.com.cn download drive, unfortunately, the Web site to open a special slow, download driver Unfortunately a43s have ABCDEFG, check the ABC are WIN764BIT,D is Win732bit drive, because the driver number is too messy to get to know which, like the NIC driver, there are Rui Yu, also There's something else. Later the download driver wasted a lot of time, and finally PCI simple communication device Mei, played well. Drive to the end, unfortunately when you install Office, forget to open the administrator, the default is static, and then start the menu to run the input secpol.msc, local security policy to start the administrator, ctrl+alt+ Del Switch to Administrator, and then modify the registry to move the desktop, My Documents, favorites to the D disk backup, the advantage is that the installation of the system desktop will not need to back up. Later installed Office2007plus, because this software in dozens of of the machine is not a problem, unfortunately, the beginning because of file copy has a problem, and then copy again, installed after all display configuration progress, unfortunately, the configuration progress after the start will not be able to launch, and then installed 2003 also not so .

Install the Office 2007 compact version also not, the compact version 2003 also not, this is the head is big, later to appwiz.cpl Uninstall Office 2007 incredibly not, repair also not. Even uninstall is not good, and then use Windows Optimization Master directly to uninstall 2007, with the system uninstall will never uninstall. Later I thought of an approach that might be a problem with Windows install, downloading Windows install clean up, But the tragedy is Cleanall all appwiz.cpl previously installed uninstall program is not, with 360 uninstall also see, after installed software can see. Then the system installed after the use of osghost to back up the system, but not start, but click Osghost Uninstall Boot.ini options, unfortunately, there are two menus, Msconfig did not find a boot.ini, in the C disk did not see. My computer's properties are not visible. Then directly start the menu to run cmd, then bcdedit look, and then remove the extra menu with Bcdedit/delete {FFSDFKSDFJKSDKFJKSDF} so you can remove the second menu, restart the system the second menu is gone.

Here are the solutions to the problems that have been encountered:

1.office 2007 problem

Since the installation of Office2007, every time you start to display the configuration progress, you need to reconfigure. If you wait, you should wait for two minutes, if you cancel the installation configuration, you can continue to use, a word, annoying.

Open "My Computer"--"C:\Program Files\Common Files\Microsoft Shared\office12\office Setup Controller"--Find a "setup." EXE file, rename the file, and change it to Abc.exe. This will solve the problem.

If it is not resolved, the registry will be modified to modify the following methods:

Start-> run-> enter regedit-> open Register list, find HKEY_LOCAL_MACHINE\Software\Classes, right button-> privilege-> Advanced, the new interface appears in the "Permission entries" List of selected creator OWNER, dot Edit, in full Control, allow the hook over there!

The problem is solved.

2.PCI Simple communication device driver is Mei drive Intel Management Engine Interface

3. As a good practice, before you make any changes to the startup options for Windows Vista, you first have to back up the startup options in the BCD, and the corresponding commands we've covered in the previous page, and then we're going to use "bcdedit" or "bcdedit/enum." All to view the correct GUID identification of the hard disk or partition in the system and record it. 　　After all, Bcdedit is just a command-line tool, and we need to manually enter long strings such as "" When we operate, which can easily make mistakes, which often results in the failure of Windows Vista startup. The following is a detailed description of the common command format for using Bcdedit to modify startup options: Bcdedit/set {ntldr} Description "Windows XP Professional SP2": Modify the previous generation's display in the Startup menu, for example, we can also Modify it to "Vista World de special XP SP2" and so on. Note that the quotes in the command are not to be omitted; the operating system Bcdedit/set {current} description Windows Vista build 5270 X86″: Modify the display of the operating system on the Startup menu for the current boot hard disk or partition. Note that the operating system on the current partition may be Windows Vista or other systems, and of course, the quotes in the command cannot be omitted; bcdedit/set {<guid&gt} description Windows Vista build 527 　　0 x64 ": Modify the display content of the system installed on other hard disk or partition in the boot menu, be sure to note that the hard drive/partition GUID is entered correctly and the corresponding GUID can be viewed through the" bcdedit "or" Bcdedit/enum all "commands. Bcdedit/default {Current}: Sets the operating system in the currently boot hard disk/partition as the default boot system; bcdedit/default {<guid>}: Sets the system that the operating system on the specified GUID is started by default; bcded It/default {ntldr}: Sets the system that Windows XP for the previous generation of Windows system started by default; Bcdedit/displayorder: Sets the order in which items in the enabled menu are displayed, such as: Bcdedit.exe/display Order {ntldr} {current}: the headerShow Windows XP First, and then show the default boot system such as Windows Vista; Bcdedit/timeout 15: Change the default boot menu to 30 seconds to 15 seconds, and of course, you can change this time to any value you want.

4. The system installed after the new administrator account must be deleted, if Ctrl+alt+del can not find the administrator, is the Administrator account is disabled. To the local security policy, start the administrator, Guest also, then Ctrl+alt+del switch to the administrator, Then compmgmt.msc delete the system installed new administrator, this is best to install the system to operate to avoid the installation program error.

5. Backup system is best not in Windows with osghost some systems Win7 do not support, to the end left two menu, if there is bcdedit to remove it.

6. ASUS Notebook www.asus.com.cn

Http://support.asus.com.cn/download.aspx? The SLANGUAGE=ZH-CN&M=A43SJ&P=3&S=310&OS=29&HASHEDID=6DRHXVVFFHPRNCW2 model is A43SJ driven. Chipset, ATK Accelerator driver, Graphics gt520 driver, reader Drive, USB3.0 Drive, wireless WLAN drive, Mei driver, camera driver.

7.office problem it is best not to remove all files that are best not to delete the Windows/install directory completely. C:\WINDOWS\Installer is used to store MSI files or the temporary files required for program installation, all WINDOWS Installer installed application software, and its registration information and related components are stored here, do not easily delete windows\ Any data in the Installer folder may cause overall chaos. Office, for example, is part of this windows-based Installer installation software. If you delete the data in Windows\Installer, Office appears to be on the surface as normal but cannot find an icon, essentially showing that most of the functional components are not working properly, or even trying to remove Office in Add Remove Programs, an unknown error occurs. When the time will become a mess of a disorderly stall, want to use, want to delete deleted, to cry without tears. Other Windows Installer software also has Altova XMLSpy, Microsoft Visual Studio, Windows Live Messenger (MSN), Adobe CS Suite, PowerWord, etc.

In office, for example, when you delete the contents of this folder, Office Setup will not work, whether reinstalling, repairing, adding and removing Office components, you must manually remove office and then reinstall. Open the registry to Hkey_classes_root\insaller\products, locate the uninstall information for Office, delete the corresponding registry key, and then manually remove the Office folder, and then rerun Office Setup to run properly , all the rest of the Windows Installer software is handled this way. It is basically not feasible for you to replicate this file in the same system as anyone else, because how can everyone install software exactly the same?