Here describes the WIN7/8 system, the general method, which is not installed under the disc method, the first production system to start the U disk, and then install
--------------If there is an installation disk directly to the CD boot, to install
Tools/raw Materials
Hardware
At least 4G size u disk
Software
Software 1:ultraiso Download Address: http://www.greenxiazai.com/soft/16642.html
Software 2: Install the image download address: http://bbs.pcbeta.com/viewthread-695496-1-1.html
Method/Step
1.1 Starting the software with Administrator privileges UltraISO
1.2 Locate your installation image in the local directory of the Open interface
2.1 Double click on the install image to eject detailed details
2.2 Click on the menu to start-write the hard disk image, open the interface, select the disk you want to use as the boot disk. If you have something in the disk, first click the format and then write, otherwise, directly click Write, wait for write completion, you can close the software, at this point, the launch disk is finished
This step is to carry out a U disk launch, here to the Web site, have detailed experience
Http://jingyan.baidu.com/article/72ee561a9d330fe16138dfe3.html
After the operation is set up, reboot, and go to the U disk reboot
----------------------------------------------------------------------here a brief description + map
Boot F2 (different computers, see instructions) into the BIOS ———— select the "Boot" menu under the "Hard Disk drives" ———— will "1st Drive" set to your USB drive ———— return to the previous interface, select "Boot Device Priority" 。 Set "1st Boot Device" to your USB drive ———— Press F10 to save the settings and exit. (This step must)
Reboot, start installation, see detailed link here. to step 7th.
Note: When the reboot, the U disk immediately pull out, or the restart mode to the hard drive to start (that is, back to the original mode), otherwise it will experience the installation process again!
After the reboot, the various settings are started. You can go to the desktop after setting.
6
Activate with the Pony Activation tool and reboot after activation