Barcode machine How to install and use the general Method!

A barcode printer is just a printer that you can use to print barcodes. Because of its printing supplies, including the installation of supplies and the corresponding required printing software and software settings, the use of different, so many users feel very dizzy. In fact, the use of barcode printer is similar to the ordinary printer, but also the first to install the printer driver, and then install the printing supplies, followed by the user layout, and then output the printed content to the printer. Below Shenzhen Trust constant technology for everyone to introduce how to use the bar code machine steps.

First, the installation of print media

1. Label paper installation (because of barcode printer brand, a lot of models, the author here to C168 as an example, other models of machine installation method) to open the printer lid, exposing the volume branch warehouse. Take out the paper roll frame, put the paper roll from left to right into the paper roll frame, and put the paper roll bracket together with the paper roll back to the paper roll bin. Align the paper volume to the left, and lean the bezel on the tray to the left to tighten the paper volume. Open the Print Head module and hold the print head group in one hand to avoid falling, pass the label through the print Head group, and pull the label out of the label Guide to let the label pass over the roller. Close the print head to touch the group until you hear a "click" Sound. Close the top cover, turn on the power switch, if the printer power is connected, press the Feed button directly.

2. Carbon Tape Installation

Open the printer cover, exposing the volume branch, press the release button on both sides of the printer, open the print Head Touch Group, open the print head to touch the group exposed to the Carbon ribbon supply end, take apart the ribbon packaging, take out the ribbon and the empty core, the bar code carbon Tape Front-End small connection to the empty volume core. Install the Ribbon to the Ribbon supply end (first Kazoudo in the right side), close the print head Touch group in the empty core in the Carbon Belt recovery End (first Kazoudo in the right side). Rotate the print head to the left side of the gear, determine the carbon tape, and press down the print head to touch the sides of the group until you hear "click".

3. Connect the printer

Connect the power cord, the USB print line, turn on the power switch, and put the random disc installation drive.

4. Driver installation

Put the CD into the CD-ROM drive, the point of automatic playback will appear as shown below, point "go", select the barcode printer products in the driver download, the "Find new Hardware" prompts, choose "Accept", "next" in point. Specify the installation directory for the Seagull driver, click to complete. Select Install printer driver, next select machine "Postek c168/200s", select printer's connection port, next enter printer name, choose not to share printer, next. Check to see that all data is correct and complete. The driver installation and the common use of laser, inkjet printer, here do not do more introduction!

5. Installation and use of software

Print software can use bartender, the software supports all barcode printers, and the layout is more convenient, bartender barcode printing software is currently the most powerful, most convenient label design printing software, its design easy, professional, 85% Barcode machine users are using bartender software to edit the design of barcode labels, you can easily produce ordinary barcode labels, and with graphics barcode labels and with your EXCE,ERP system database, so that you can not bother to transfer data, fast completion of barcode label design task.

The following is the bartender software usage diagram:

Will be boss of the barcode printer hardware installed, the machine will be taken out of CD-ROM. You can install the bartender software. As shown in the following illustration:

1> Double-click the desktop icon to open the bartender software. The following illustration shows the Welcome interface:

2> Select the label format you want, and for the first time you open the software for editing, choose "Start a new label format." If it has been previously opened, such as the 50_30 label paper displayed in the text box, select "Open recently used label" directly.

3> new Label Format Wizard, select "Blank label format"--> "Next".

4> Select the printer. This must select "Postek c168/200s"--> "Next".

5> Select the volume. volume Specifies the size of the page and the size, number, and location of the labels on the page. You can select a predefined volume or specify your own custom settings.

6> sets the label volume. Specify the characteristics of the label volume and select the specification of the actual label. If label paper 32*19*5000, select "Multiple label columns and/or rows (M), row number" 1 ", Column number" 3 ".

7> side setting.

8> the paper size setting. You can select the paper size user Defined Size "width" "104.1" "Height (actual size)". Note: Here to specify, the width is unchanged, the machine will be automatically detected after the paper, do not need to change. Height can be set according to the actual situation.

9> label shape.

10> label size. Fill in according to the actual situation.

11> print order, set printing in the order of the specified label.

12> Click Finish to complete the creation.

13> into the editing interface. All day layout is shown in the following illustration:

14> text editing area. There are "label design" and "Hint Design", select the label design to start editing the label document.

15> standard Barcode, component, data source Toggle Optional box.

16> Tool Bar

17> Edit the text. Click the following icon

, click in a blank area to appear

Double-click Sample text to change the area of the text. As shown in the following figure: input "Shenzhen Trust Constant Technology Co., Ltd."

The following is the font area, which modifies the text font.

The following figure is the text box to select a range, which can be selected by type: single line, paragraph.

You can also lock the text "position" as shown in the following illustration:

General settings, as shown in the following illustration:

18> Click OK, the following interface appears.

19> Click the barcode icon, you can insert the relevant bar code, the figure is code 39-regular barcode.

20> page settings. "Files"-"Page Setup"-"paper", as shown in the following illustration:

Layout, adjust the number of rows, columns, margins, label size, spacing, and so on.

21> printing. After editing the barcode label, you can print the effect. Method: "File"-"print" or press ctrl+p. As shown in the following illustration:

Note: If the number of prints is 3, the "Quantity"-"number of copies of the same label" must be entered "3". such as label paper 32*19*5000, is a row of 3 column specifications. The following illustration is the object printing method:

The performance setting, as shown in the following illustration:

22> save. Click the icon or press Ctrl+s to save the currently loaded format, as shown in the following illustration.

23> closes the window and exits. Press ALT+F4.

Note:

1. When you create a barcode label, you must select Postek c168/200s in the new Label Format Wizard to select a printer.

2. "Paper Size" setting: Width according to machine identification, can not be modified; the height of the actual measurement is subject to modification.

3. "Label size" setting: width, height must be strictly in accordance with the actual measurement, 0.1mm can not be error, otherwise it will affect the actual printing effect. "Spacing", the level is entered "2mm". Vertical spacing, according to the actual setting.

4. When you insert a barcode, double-click the barcode to enter modify the selected barcode object. Here you can change the barcode's data source, barcode, readability, font, position, and so on. where "font" refers to the font below the bar code.

5. The print setting. When printing quantity, the number of copies of "same label" must be set according to the actual situation. such as 40*25*2500 specifications of the label paper, a row is two columns, you must enter the "2", at this time you press "print", the result of the printed effect on a row of 2 columns.

The above is a barcode printer how to use the steps introduced, the use of correct and complete use of good barcode printers, need to install a good label paper and ribbon, and then the typesetting and printing, I hope that we know after the correct use of barcode machine, so that better use in the work!