BIOS setup U disk start text Detailed tutorial

Many friends have a U disk in hand but do not know how to use U disk installation system. Here I give you a brief introduction to the method, we can download the Pocket PE, and system as a boot U disk into the PE installation system. Before entering the PE installation system, we need to set the BIOS to achieve the USB disk boot.

U disk to start the most critical step is the BIOS set U-boot sequence, BIOS set U disk to start a total of two methods, one is to enter the BIOS set U disk for the first start, and another one is the use of computer hot keys to quickly choose a U disk boot.

Today, we are here to enter the BIOS settings USB disk boot method, that is, enter the BIOS interface to set U disk Boot sequence method. Because there are many motherboards on the market now, can not give you one by one explanation, here only some of the market share of the higher the Board's Biso setting method.

2002 Computer BIOS Motherboard

First introduced is a 2002 computer BIOS motherboard, this BIOS is mainly used for Lenovo and other notebooks, first of all, we start the computer press the keyboard F2 key into the BIOS settings interface (different brands into the Biso method, see "Different brand motherboard computer BIOS boot Hot key"), Through the keyboard "left and right" key to move to the boot selection, and then select the boot Device priority enter.

Figure I

Startup priority device Selection (boot Device Priority) Select U disk in the first boot device (1st boot Device). If you do not find your USB drive, press the ENTER key on the keyboard to enter the next step. As shown in Figure II

Figure II

In the hard drive "Hard disk Drives" interface, select the U disk for the first boot device "1st Drive". As shown in Figure three

Figure Three

The U disk for the BIOS set boot device "1st Drive", back to the boot Device priority interface when the first start item will become your U disk, click F10 Save BIOS Settings USB disk launch is completed, Restart the computer can enter the Pocket PE interface to complete the USB disk installation system work. As shown in Figure four

Figure Four

The Old award BIOS

Old award BIOS (2009 Computer motherboard): This type of motherboard is typically used for older desktop PCs. Start the computer, press the DEL key to enter the BIOS setup interface, enter the Advanced BIOS setup (Advanced BIOS Features) interface. As shown in Figure five

Figure Five

Select the first hard drive boot priority on the interface (Hard disk boot Priority) and press ENTER on the keyboard. As shown in Figure six

Figure Six

By "+,-" on the keyboard, move the U disk to the first item in the BIOS setup. Press ESC to exit back to BIOS setup U disk boot main interface. As shown in Figure seven

Figure Seven

In the main interface select the second of the primary boot Device, select the boot u disk mode, usually we choose "Hard-disk" or "USB-HDD" can be. Save settings and restart the computer to enter the PE installation system interface, start to install the system. As shown in Figure eight

Figure Eight

To this end, BIOS setup USB disk boot complete. After completing the BIOS setup work, we can enter the PE to complete a lot of work, including U disk installation system, personalization, system partition and so on. Try it quickly!