Boot bootmgr is compressed.
"Bootmgr is compressed press CTRL + ALT + DEL to restart" appears at startup ". Event occurrence: After Windows 7 is installed, an activation tool is used to activate and restart, so this situation occurs. Cause: My c disk is compressed. Status quo: I have not installed a dual system and cannot restore it to the ghost. Try to enter winpe to decompress the C drive, but it is dumb. There is only one X drive in winpe and the size is less than 10 MB. There is no cdef disk at all. The system boot file bootmgr is compressed by you and cannot boot the system. solution: 1. 1. Start with Vista and select repair. 2. Run unzip bootrec.exe/fixmbr, bootrec/fixboot, and then restart to solve the compression problem. troubleshooting Tip 2, 1. boot the Vista DVD to get to the command line. expand bootmgr temp attrib bootmgr-S-r-H del bootmgr Ren temp bootmgr attrib bootmgr-A + S + R + H 2. Start the Vista installation disk, open the command prompt, go to your Vista SYSTEM32 (such as C:/Windows/system32), and then "Compact/u c:/bootmgr" it is best to run "Compact/u/A/f/s: c:/", decompress the entire c: partition. The problem is that the C disk is compressed, and it can be recovered after decompression. If it is a dual system and can be imported into another system or an installation disk with Windows 7, it can be well solved, but neither of these two conditions can be met. Another solution is to use winpe 4. You can perform advanced PE repair before you can see the C, D, Ed and other disks in the PE. You only need to first enter the BIOS settings and set the hard disk mode to ahci (high-speed mode) change to compatible (compatible mode) because the PE of the XP kernel does not have the ahci driver and cannot load the hard disk. find a winpe image, install it into the USB flash drive, and restart the computer to start winpe from the USB flash drive.
Copy the boot files such as bootmgr、bootsect.exe on another computer to the netbook for coverage. After overwriting, restart.