Canon 5DMarkII shot a long leg portrait photo tutorial

For your photography enthusiasts to share a detailed interpretation of the Canon 5DMarkII shot long Legs portrait photos of the tutorial.

Tutorial Sharing:

The state of the lens

The legs will look more slender, giving a fresh feel. The unique image characteristics of the wide-angle lens and the offset effect create a unique atmosphere. This is the portrait effect that only the moving axis lens can take.

Shooting data

Camera: EOS 5D Mark ii/Lens: ts-e 24mm f/3.5l ii/aperture priority automatic Exposure (f8,1/320 sec)/iso 200/white balance: Auto/exposure Compensation: +1/3ev

Use normal lenses to shoot under the same conditions

The state of the lens

Using the same height as the moving axis (the face), the lens is uniquely deformed and the leg narrows, giving people the feeling that the legs are shorter than they really are. Allowing camera angles to be parallel to the model can reduce the occurrence of this phenomenon, but some of the legs will be outside the picture. The limitations of the general lens are here.

Shooting data

Camera: EOS 5D Mark ii/Lens: EF 24-105mm f/4l is usm/aperture priority auto Exposure (f9,1/125 sec)/iso 200/white balance: Auto/exposure Compensation: +2/3ev

Shooting Essentials

1: Set the location of the shot as high as possible

Point 2: Keep the camera level and not tilt downward

1. Start real-time display shooting mode

Start real-time display shooting function to prepare for shooting. If you let the camera display the grid line in advance, you can easily configure the whole body in the entire screen. Select "Gridlines 1" here.

2. Set the camera to the height of the human face

The height of the camera should not be the height of the photographer's eyes, but the height of the face of the person being photographed. When installed on the camera and found that the foot outside the picture is not related, in short, let the characters are the camera is the key to this shooting.

3. Let the lens shift downwards

Remove the camera from the lock knob, rotate the shift knob, and let the lens shift downwards. The feet outside the screen are also being paid for the screen. Confirm that the detail imaging is appropriate after making the overall look balanced.

4. Confirm the eyes after the focus release shutter

After determining the overall composition, use manual focus, move the magnification box to the position of the model's eye, and press the automatic focus selection/Amplification button on the back of the fuselage to increase the magnification. Because the face in the entire picture occupies a small area, so using 10 times magnification can be more accurate focus. Then gently release the shutter to shoot after the Coke is closed.

Slender legs extended to toe-pointed with larger imaging rings

The basis of a slender portrait of the leg is the height of the camera shot. Set the height of the camera to the height of the character's face, and use the large imaging circle to deflect the lens from the foot. will be the whole body income lens. While shooting the legs from a low angle will also appear slender, but in the case of looking up from the bottom up, you can see the nostrils. So it's not a good place to shoot female portraits.

And from the angle must let the model receive the forehead slightly, therefore the face is easy to look fatter. and the camera placement in the model face height using the offset technique to shoot, even the toe tip looks like a leg extension, so it looks very slender legs. At the same time, the lower forehead and the smooth line of the head, will not destroy the impression of the face.

This photography technique also utilizes wide-angle and shift-axis offset of the wide-angle lens, although the 90mm axis lens can be photographed in the same way, but the effect is less noticeable because the angle of view is difficult to get the tip of the foot into the picture. In addition, because the aps-c size camera is narrower than the 35mm full format camera, you can use the 17mm axis lens to enhance the above effect.

Small Tips

Set the auto Rotate feature to off to make it easier to show shots in real time

When the camera is mounted on a tripod for a vertical shoot, if the "Auto Rotate" feature is set to "off", then the image will not rotate automatically when the picture is played back, making it easier to confirm the image shooting effect. It is recommended here that you do not rotate automatically on your camera, but automatically rotate when browsing on your computer.

With this feature, the image can be easily validated at the time of filming and browsing on the computer. The photographer should use the camera function effectively to make shooting and later work more convenient.

OK, the above information is small set to all the photography enthusiasts brought to the detailed canon 5DMarkII shot long Legs portrait photos of the whole content of the tutorial to share, you see the photography enthusiasts here, small knitting believe you now that is very clear shooting method, Then the friends are going to follow the small part of the tutorial on the course of their own to take photos of the long legs portrait to see the effect of it.