Canon 7D camera auto-focus area selection mode resolution sharing

Source: Internet
Author: User
Tags manual

Let's take a look at the autofocus area selection mode of the Canon 7D camera for photography enthusiasts.

Analysis and sharing:

To make it easier for you to accurately and quickly combine focus, multiple auto focus area selection modes are available for EOS 7D. To use the automatic focus system of EOS 7D skillfully, you must first understand the meaning and functions of each mode.

Three auto focus area selection modes in the default settings

 

 

Auto-selection: auto-focus

Focus automatically with all 19 focus points. The camera automatically determines the status of the subject to select an automatic focus. Basically, focus is selected based on the focal point closest to the subject. It is difficult to predict the movement of the subject.

 

 

Manual selection: Single point Auto Focus

Manually select a focal point from the 19 automatic focus points. Only focus is selected, so it is convenient to use this mode when focusing at a specific position.

 

 

Manual selection: Regional Auto Focus

Divide 19 automatic focus points into 5 areas. Focus is automatically focused using multiple focal points in the region. It is suitable for focusing on images with intense motion on the subject.

You can use the custom function to set two auto focus area selection modes that can be appended.

 

 

Manual selection: Fixed point Auto Focus

The selected auto focus configuration is the same as that for single-point auto focus. However, the focus range is smaller than that of single-point auto focus, so you can focus on a certain point. This mode can be used when shooting requires a more rigorous focal position.

 

 

Manual selection: automatic focus extension

The auto focus is centered on a manually selected auto focus, and the adjacent auto focus is also used to focus. This mode is effective when single point autofocus is difficult to capture the focus of the shot body. This is a mode that attaches importance to the focal position and has a high capturing force.

An EOS 7D auto-focus system that can improve response capability after mastering it

There are a total of five auto-focus area selection modes for EOS 7D. Each mode has different features based on a variety of subjects. By default, three auto focus area selection modes are available, which ensure that the subject is captured. However, EOS 7D is a camera that can further exert its strength through custom function settings. Register and start the other two auto focus area selection modes to improve the ability to respond to the subject and provide more personalized use methods. The user determines which mode to choose. However, you should first understand the features of each mode.

How to change the auto focus area selection mode

In order to smoothly select the auto focus area selection mode based on the shooting intent, you need to master the mode selection method. We hope you can be proficient in setting the auto focus area selection mode quickly and correctly.

Change procedure

 

 

To change the auto focus area selection mode, first press the auto focus select button to display the auto focus area selection mode. When the focus is automatically switched to red in the viewfinder, it is optional.

 

 

After confirming that all the auto focus points in the viewfinder are highlighted in red, press the M-Fn (multi-function) button to change the auto focus area selection mode. Operate the M-Fn (multi-function) button while observing the viewfinder to grasp the button position.

 

 

When you manually switch to the auto focus area selection mode, you only need to repeat the 2 action until you want to select the auto focus area selection mode. Each time you press the M-Fn (multi-function) button, the auto focus area selection mode will change cyclically, so you only need to repeat the 2 action to select the desired auto focus area selection mode.

The cycle sequence of the mode selected in auto focus area by default.

 

 

Auto Focus

 

 

Single point Auto Focus

 

 

Regional Auto Focus

Master the Operation steps and proceed to the next stage

To change the auto focus area selection mode, you need to use the auto focus selection button and the M-Fn (multi-function) button. The display order is the cycle mode from front to back. By default, three modes are set for cyclic switching. After the mode is added with the custom function, you can use the M-Fn (multi-function) button to perform cyclic switching for a maximum of five modes. The steps for changing the auto focus area selection mode are not complex. However, when shooting a video, you should remember the positions of buttons to complete a series of operations while observing the viewfinder. This operation is the first step for skilled use of the EOS 7D excellent auto focus system.

All right, the above information is the full content of the Canon 7D automatic focus area selection mode resolution shared by photography enthusiasts, I believe that you are very clear now. I hope that the information above will be helpful for your use of cameras.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.