CD-ROM installation win7 system steps

Let's share with you today the specific steps and methods of the Windows7 CD installation tutorial.

Place the Windows7 installation CD in the CD drive, enter the BIOS when the computer starts up and set the first boot device to the optical drive, press F10 to save the settings and exit the BIOS.

1. The computer automatically restarts after the following figure prompts, please press the keyboard any key from the CD-ROM drive computer.

2. The computer starts loading the installer file from the CD drive

3. After the installer file load completes the Windows7 installation interface, because the WINDOWS7 installs the CD is the Simplified Chinese, therefore all chooses the default value here, clicks Next.

4. Click the Install Now button to start the installation.

5. The terms of the license agreement appear in the "I accept the terms of the license" before the tick, and then the next step.

6. The installation type selection interface appears, because we are not upgraded, so select the custom (Advanced) option

7. The installation location selection interface appears, where you choose to install the system partition, if you want to partition or format the hard drive, click Drive Options (Advanced).

8. Here you can partition the hard disk, or you can format the partition. After selecting the partition for the installation system, click Next.

Because WINDOWS7 automatically formats the partition when it is installed, there is no need to format the partitions of the installation system here.

9.windows7 start the installation.

10. After the installation completes, the computer needs to reboot.

11. Start updating registry settings after computer restarts.

12. Start the service.

13. This is the final completion of the installation phase.

14. After the completion of the installation phase, the computer needs to reboot.

15. After the computer restarts, the installer prepares for the first time using the computer.

16. Enter the username and computer name and click Next.

17. Set the password for the account, if the password is not set here (leave blank), the computer will not appear in the start of the password prompts, but directly into the system

18. Set the system Update mode, recommend select the recommended option.

19. Set the date and time of the computer.

20. Set the network location, there are home, work and public three options, including the most relaxed home network, the most stringent public networks, according to their own actual situation to choose.

21. Finish Setup.

22. Prepare the table.

23. Welcome interface, start login system.

24. Enter the system desktop.