CD-ROM installation ghost

CD-ROM installation GHOST_XP/WIN7/WIN8 general tutorial The following tutorials are more detailed, the length is a little long please be patient to read

There are many ways to install the system, such as CD-ROM installation system, u disk installation system, hard disk installation system, network clone installation system, etc. The following tutorials are common to XP systems, Win7 systems, and WIN8 systems.

Before studying the tutorial, let's talk about the advantages and disadvantages of the CD-ROM installation system.

The advantages of CD-ROM installation system: Easy to manufacture, low cost, can be used many times, no virus infection, easy installation.

The shortcomings of the CD-ROM installation system: The disc is easy to damage, by the CD-ROM ability to affect the larger.

In any case, the CD-ROM installation system as a traditional way of installation, we still have to learn it.

Preparation Tool: A recording of a good system CD, if you have not carved the system CD, please refer to the Burn System CD Tutorial

The first step: to learn the CD-ROM installation system, we have to learn how to set the CD-ROM first boot, this involves the BIOS settings, please look down;

Another delight is that the hardware has evolved to date the BIOS settings and startup options have been very user-friendly, a lot of computers, notebooks do not need to enter the BIOS to set the CD drive for the first boot

We just need to be mad. Select the CD-ROM drive priority by selecting the key for the corresponding startup item.

(Small series to enumerate some of the more general hot keys: F11, F12, ESC, F8, F9, etc.) major manufacturers are generally used in these keys, specific reference to the "Startup Key Hotkey Encyclopedia"

Of course, the motherboard, notebook a wide range of their own computer or need to press the corresponding hotkey to press.

So, for older machines, or computers that don't know how to start a hotkey, it's important to learn more about the general BIOS Setup method:

Lei, AMI BIOS motherboard CD-ROM boot setup (power-on Repeat, del key entry)

As shown in the figure above, we select the CD-ROM Drive and then use the "+" plus or "-" minus sign to move the CD-ROM item to the first place, and then press F10 to restart the computer (Setup is complete) as follows: This article to the win7 system download http://www.xitonghe.com

Example two, award BIOS motherboard CD-ROM boot settings (also press Del to enter the BIOS)

Into the BIOS interface we select advanced BIOS settings and return to see the following figure

We can see the first boot device, enter and select the CD-ROM and then press F10 to save the exit or Antu option.

Win7 System Download http://www.xitonghe.com

Liesan, as shown in the following image bios Similarly, we choose CD-ROM or DVD-ROMs at the red Bottom.

List four, the same 1st selection for CDROM win7 system download http://www.xitonghe.com

As a few examples, although the interface is not the same, set the principle is the same, we just find the appropriate location to set it. For more BIOS setup methods see the major BIOS optical drive startup settings Encyclopedia

Step Two: Start the installation system after the CD starts

1, to the CD-ROM start interface, select the operation you want to do, usually up or down key or CD-ROM note shortcut keys can be selected (as shown below):

As shown above the computer company Win7 flagship version for example, the above functions, the Application menu at a glance; If your computer has been partitioned or does not need to partition, select the "Install the system to the hard disk first Partition" Enter can automatically start installation system, if not please look down;

2, the hard disk partition, you can directly select Diskgenuis 3.5 partition tool to partition (of course, you can also choose other zoning tools, small series to Diskgenius to explain because it is now the area of the largest use, the most versatile, most functional partition tool. )

For the purpose of the tutorial more detailed convenience, small edit here first choose to enter the Windows PE Micro-system for zoning and installation operations;

OK, now we choose the second entry into the win PE system;

PE interface, from the above figure we can see, maintenance tools, zoning tools a lot, there is a key to install the system to C-disk shortcut program, we mainly explain how to partition the hard disk, the same choice Diskgenius 3.5

How to operate the following figure:

Yes, it's very simple to follow the above picture, you just have to choose your hard drive and make a quick partition. Set the size of the C disk and the size of the partition can be completed after the completion of the setup click to determine the partition a few moments later.

3. System Installation:

After the partition is complete, the installation system is very easy to do, we can choose the PE "install system to C Disk" shortcut program or use the Ghost Installer to complete, the following figure:

4. Installation process:

Next is the process of ghost, after Ann will automatically install the operating system, small series will no longer repeat.

A detailed CD-ROM installation GHOST_XP/WIN7/WIN8 General tutorial finally finished, through the above tutorial, if you carefully look down must learn to install it finally wish you a successful installation.

This article for the system box original, if you want to reprint please be sure to indicate the source or leave the site connection, win7 system download http://www.xitonghe.com to remember the hard people must have lovely place.