Cisco 2811 Routers Detailed configuration

Cisco 2811 Routers Detailed configuration

Router>enable

Router#configure Terminal

Router (config) #hostname cisco2811//define router name

2811 (config) #enable password 124563831//Set Login password

2811 (config) #line vty 0 4

2811 (config-line) #password 124563831//Set Telnet password

2811 (Config-line) #login

2811 (Config-line) #exit

2811 (config) #interface fastethernet 0/0//Set Intranet interface

2811 (config-if) #ip address 192.168.1.254 255.255.255.0

2811 (config-if) #no shutdown

2811 (config-if) #exit

2811 (config) #interface fastethernet 0/1//Set up an external network interface

2811 (config-if) #ip address 125.89.61.94 255.255.255.0

2811 (config-if) #no shutdown

2811 (config-if) #exit

2811 (config) #ip Route 0.0.0.0 0.0.0.0 125.89.61.1//configure default route

2811 (config) #ip Route 192.168.2.0 255.255.255.0 192.168.1.1

2811 (config) #ip Route 192.168.3.0 255.255.255.0 192.168.1.1

2811 (config) #ip Route 192.168.4.0 255.255.255.0 192.168.1.1

2811 (config) #ip Route 192.168.5.0 255.255.255.0 192.168.1.1

2811 (config) #access-list permit 192.168.1.0 0.0.0.255//Access Control List settings

2811 (config) #access-list permit 192.168.2.0 0.0.0.255//Access Control List settings

2811 (config) #access-list permit 192.168.3.0 0.0.0.255//Access Control List settings

2811 (config) #access-list permit 192.168.4.0 0.0.0.255//Access Control List settings

2811 (config) #access-list permit 192.168.5.0 0.0.0.255//Access Control List settings

2811 (config) #ip NAT inside Source list interface F0/1 overload

2811 (config) #ip NAT inside Source list interface F0/1 overload

2811 (config) #ip NAT inside Source list interface F0/1 overload

2811 (config) #ip NAT inside Source list interface F0/1 overload

2811 (config) #ip NAT inside Source list interface F0/1 overload

2811#configure Terminal

2811 (config) #interface fastethernet 0/0

2811 (config-if) #ip nat inside

2811 (config-if) #exit

2811 (config) #interface fastethernet 0/1

2811 (config-if) #ip Nat outside

2811 (config-if) #exit

2811 (config) #ip nat inside source static TCP 192.168.1.13 125.89.61.92//OSG FTP

2811 (config) #ip nat inside source static TCP 192.168.1.10 125.89.61.92//CA certificate Request

2811 (config) #ip nat inside source static TCP 192.168.1.12 125.89.61.93//ftp Port

2811 (config) #ip nat inside source static TCP 192.168.1.21 125.89.61.93 8080//oa http port

2811 (config) #ip nat inside source static TCP 192.168.1.21 1935 125.89.61.93 1935//oa Video port

2811 (config) #ip nat inside source static TCP 192.168.1.21 2397 125.89.61.93 2397//oa Dingshi Task port

2811 (config) #ip nat inside source static UDP 192.168.1.21 1188 125.89.61.93 1188//oa im Port

2811 (config) #ip nat inside source static TCP 192.168.1.21 125.89.61.93//oa Mail Port

2811 (config) #ip nat inside source static TCP 192.168.1.21 125.89.61.93//oa Mail Port

2811 (config) #ip nat inside source static TCP 192.168.1.21 8000 125.89.61.93 8000//oa RTX Port

2811 (config) #ip nat inside source static TCP 192.168.1.102 125.89.61.93//XX Office Web Monitoring

2811 (config) #ip nat inside source static TCP 192.168.1.102 37777 125.89.61.93 37777//xx Office Real-time monitoring

2811 (config) #ip nat inside source static TCP 192.168.1.189 125.89.61.94//exchange SMTP port

2811 (config) #ip nat inside source static TCP 192.168.1.189 125.89.61.94//exchange POP3 Port

2811 (config) #ip nat inside source static TCP 192.168.1.189 125.89.61.94//exchange http port

2811 (config) #ip nat inside source static TCP 192.168.1.189 143 125.89.61.94 143//exchange IMAP port

2811 (config) #ip nat inside source static TCP 192.168.1.189 993 125.89.61.94 993//exchange Imap4/ssl Port

2811 (config) #ip nat inside source static TCP 192.168.1.189 995 125.89.61.94 995//exchange Pop3/ssl Port

2811 (config) #ip nat inside source static TCP 192.168.1.189 443 125.89.61.94 443//exchange RPC Port

2811 (config) #ip nat inside source static TCP 192.168.1.189 587 125.89.61.94 587//exchange Smtp/ssl Port

2811 (config) #ip nat inside source static TCP 192.168.1.150 125.89.61.95//CRM http port

2811 (config) #ip nat inside source static TCP 192.168.1.13 80 125.89.61.190 80///Friends Day Wing remote access

2811 (config) #ip nat inside source static TCP 192.168.1.13 5872 125.89.61.190 5872///Friends Day Wing remote access

2811 (config) #ip nat inside source static TCP 192.168.1.150 125.89.61.190//ftp Port

Routerconfig #no IP dhcp conflict logging de-address conflict logging

Routerconfig #ip DHCP excluded-address 192.168.1.1 192.168.1.99//settings cannot be used for dynamically assigned IP addresses

Routerconfig #ip DHCP Pool dhcp_pool1//Configure an address pool

Routerdhcp-config #network 192.168.1.0 255.255.255.0//dynamically assigned address segment

Routerdhcp-config #domain-name trsa.com.cn//To configure the domain suffix for the client

Routerdhcp-config #dns-server 192.168.1.10 192.168.1.30 Configuring DNS servers for clients

Routerdhcp-config #netbios-name-server 192.168.1.10 192.168.1.30 To configure a WINS server for a client

Routerdhcp-config #netbios-node-type H-node Configure the node mode for the client (which affects the success of name interpretation, as H-node is explained first through the WINS server)

Routerdhcp-config #lease 15 Address rental period is 15 days

Routerdhcp-config #default-router 192.168.1.1 To configure the default gateway for the client, which is the IP address of VLAN1

Routerconfig #ip DHCP Pool dhcp_pool2//Configure an address pool

Routerdhcp-config #network 192.168.2.0 255.255.255.0//dynamically assigned address segment

Routerdhcp-config #domain-name trsa.com.cn//To configure the domain suffix for the client

Routerdhcp-config #dns-server 192.168.1.10 192.168.1.30 Configuring DNS servers for clients

Routerdhcp-config #netbios-name-server 192.168.1.10 192.168.1.30 To configure a WINS server for a client

Routerdhcp-config #netbios-node-type H-node Configure the node mode for the client (which affects the success of name interpretation, as H-node is explained first through the WINS server)

Routerdhcp-config #lease 15 Address rental period is 15 days

Routerdhcp-config #default-router 192.168.2.1 To configure the default gateway for the client, which is the IP address of VLAN2

Routerconfig #ip DHCP Pool DHCP_POOL3//Configure an address pool

Routerdhcp-config #network 192.168.3.0 255.255.255.0//dynamically assigned address segment

Routerdhcp-config #domain-name trsa.com.cn//To configure the domain suffix for the client

Routerdhcp-config #dns-server 192.168.1.10 192.168.1.30 Configuring DNS servers for clients

Routerdhcp-config #netbios-name-server 192.168.1.10 192.168.1.30 To configure a WINS server for a client

Routerdhcp-config #netbios-node-type H-node Configure the node mode for the client (which affects the success of name interpretation, as H-node is explained first through the WINS server)

Routerdhcp-config #lease 15 Address rental period is 15 days

Routerdhcp-config #default-router 192.168.3.1 To configure the default gateway for the client, which is the IP address of VLAN3

Routerconfig #ip DHCP Pool DHCP_POOL4//Configure an address pool

Routerdhcp-config #network 192.168.4.0 255.255.255.0//dynamically assigned address segment

Routerdhcp-config #domain-name trsa.com.cn//To configure the domain suffix for the client

Routerdhcp-config #dns-server 192.168.1.10 192.168.1.30 Configuring DNS servers for clients

Routerdhcp-config #netbios-name-server 192.168.1.10 192.168.1.30 To configure a WINS server for a client

Routerdhcp-config #netbios-node-type H-node Configure the node mode for the client (which affects the success of name interpretation, as H-node is explained first through the WINS server)

Routerdhcp-config #lease 15 Address rental period is 15 days

Routerdhcp-config #default-router 192.168.4.1 To configure the default gateway for the client, which is the IP address of VLAN4

Routerconfig #ip DHCP Pool DHCP_POOL5//Configure an address pool

Routerdhcp-config #network 192.168.5.0 255.255.255.0//dynamically assigned address segment

Routerdhcp-config #domain-name trsa.com.cn//To configure the domain suffix for the client

Routerdhcp-config #dns-server 192.168.1.10 192.168.1.30 Configuring DNS servers for clients

Routerdhcp-config #netbios-name-server 192.168.1.10 192.168.1.30 To configure a WINS server for a client

Routerdhcp-config #netbios-node-type H-node Configure the node mode for the client (which affects the success of name interpretation, as H-node is explained first through the WINS server)

Routerdhcp-config #lease 15 Address rental period is 15 days

Routerdhcp-config #default-router 192.168.5.1 To configure the default gateway for the client, which is the IP address of VLAN5

VPN PPTP

Interface Virtual-template1

Nat IP Inside

Peer default IP address pool vpndhcp

PPP Encrypt MPPE Auto

PPP Authentication MS-CHAP

IP address 192.168.0.100 255.255.255.0

2811#copy running-config startup-config//Save Configuration

This article is from the "Zhou Ping Microsoft Technology Exchange Platform" blog, please be sure to keep this source http://yuntcloud.blog.51cto.com/1173839/1601586

Cisco 2811 Routers Detailed configuration