Cisco AP iOS Upgrade:
Method One, this method can also be used for the upgrade of the thin AP to the FAT AP, which can be the version upgrade of the FAT AP IOS system itself:
Prerequisite Preparation: Console line and LAN cable access AP and notebook, set notebook IP 10.0.0.2/8, open TFTP set AP's iOS path (. Default file)
Then press and hold the mode key until you are prompted to release the button and then release the mode key, when the AP will automatically find the TFTP iOS path and then upgrade or replace the current iOS.
Method Two, this method is used for the upgrade of the FAT AP IOS system version:
ap# archive Download-sw/overwrite/force-reload tftp://[ip address ]/[ios file name ].tar The IOS image file name is case-sensitive and should be spelled completely .
ap (config) # boot system flash:/xxx.bin " command in"Sh Run"not displayed in the. "sh boot"Displays the specifiedIOS. ·not at CiscoAPused on"Copy tftp Flash:". It doesn't work .!
already tested on Cisco AP 1602i!
2015.5.6 Feng Xiaojin
This article is from the "Andywalker" blog, make sure to keep this source http://767511064.blog.51cto.com/825767/1643578
Cisco AP iOS Upgrade