Cisco Router basic Configuration command

One

1.router (config) #router rip start RIP process

2.router (conifg-router) #network 172.17.0.0 The primary network that specifies the RIP protocol

3.router (config-router) #passive-interface F0/1 to configure F0/1 as passive port

4.router (config-router) #neighbor 172.17.12.67 Unicast notification of RIP updates to routers

5.router (config-if) #ip address 192.168.83.244 255.255.255.0 Primary IP addresses

Router (config-if) #ip address 10.33.55.1 255.255.255.0 secondary secondary IP addresses

Two

1.router (Config-router) #version 2 to configure RIP as version 2

2.router (CONFIG-IP) #ip RIP send version 1 only RIP 1 packets

Router (CONFIG-IP) #ip RIP receive version 2 only receives RIP 2 packets

3.router (config-router) #no auto-summary closing summary function

4.router (config-if) #no IP split-horizon off Horizontal segmentation

5.router#show IP OSPF database router 192.168.30.10 display Router LSA notification

Router#show IP OSPF database network 192.168.17.18 Display Network LSA notification

Router#show IP OSPF Database summary 172.16.121.0 Display Network Rollup LSA notification

Router#show IP OSPF database asbr-summary display ASBR Rollup LSA notification

Router#show IP OSPF database external 10.83.10.0 Display Autonomous System external LSA notification

Router#show IP OSPF database nssa-external display NSSA external LSA notification

Three

1.router (config) #router OSPF 10 configuration OSPF process ID

2.router (config) #interface loopback0

Router (config-if) #ip address 192.168.10.1 255.255.255.0 configuration Loopback0 interface

3.router (Config-router) #area 1 stub configuration stub area

4.router (Config-router) #area 1 stub no-summary configuration totally stubby zone

5.router (config-router) #area 1 nssa configuration Nssa Area

6.router (config-router) #area range 172.16.0.0 255.240.0.0 configuration address Rollup

7.router (config-router) #area virtual-link 192.168.100.33 configuration Virtual link

Four

1.router (config) #standby 172 IP 172.16.10.254 Join backup Group 172 specify virtual IP address

2.router (CONFIG-IF) #standby Priority 150 Configuration HSRP Priority 150

3.router (config-if) #standby the preemptive right of preempt configuration HSRP

4.router (config-if) #standby 2 9 2 indicates hello time, 9 means to hold time

5.router (config) #interface S0

6.router (config-if) #standby track S0 100 Configure the trace port S0 and reduce the port down by 100

7.router#show Standby Brief View the status of HSRP

8.router#no debuge all Turn off debugging features