Cisco Server Configuration RAID steps

CISCO Server Configuration RAID steps

ILO for DHCP(not recommended fixed), open the page (such as:https://10.0.1.240), user name:admin, Password:password, First login will let the password, after the change will let the re-login, click LAUNCHKVM Console(need to install Java, and the browser can not be disabled, if it is disabled to all Programs-Java- - Configurejava--security--Enable browser java

Press F8--after the end--Power--ResetSystem--F6(seemingly not first F8 behind the Raid interface does not come out, test several times this is the case)

Ctrl+h

Select RAID Adapter

Click Start

Click Configuration Wizard

Select New Configuration

Click Yes

Select Manual Configuration--Next

Click on 1 HDD--Add to Array(repeat 7 times, i.e. 7 HDD)--Accept DG

Next

Click Add to SPAN

Next

Raidlevel:RAID 5 Select size:120 GB --Accept

Yes

Click Back

remaining 3.151T--Add to SPAN--Next

Click Update Size ( will show all the rest )

Accept--Next

Finally, 2 VD (VD 0 and VD 1) is generated --Accept

Click Yes

Yes

Yes

It is automatically formatted and formatted as follows--click Home

Click on the 8 hard drive (by the way, check the above two VD is correct)

Click Make Global HSP--Go

ultimately The RAID results are as follows--click Exit

Yes

Mount iso--click Virtual Media--click Activate Virtual Devices--CD/DVD--Accept This session--Tick Remember--Apply

Browse to find iso file--Map Device

Select when restarting F2-Boot Options-set the Bus Dev to the top ("+" is the top level)--F10(back and HP , etc.)

This article from "Linux" blog, declined reprint!

Cisco Server Configuration RAID steps