Cisco Route wireless layout skills

Cisco Route wireless layout skills
Many companies encounter periodic disconnection problems when using wireless networks. How should we solve this frequent disconnection problem? Next we will give you a detailed introduction.
I. The first thing to consider is the laptop, which may be caused by network connection errors due to compatibility or driver problems of the wireless network adapter. Check whether the wireless network adapter has any quality defects, then, check whether the NIC Driver is normal or the driver version is too old. 2. Because the wireless router transmits signals through electromagnetic waves, we must consider the environment when selecting the placement location. Try to keep the route away from cordless phones, printers, and other electrical appliances to avoid electromagnetic interference or disconnection. This can also effectively avoid wireless router disconnection. Www.2cto.com
3. At present, most wireless routers use an omnidirectional antenna. Its placement angle will affect the signal quality to a certain extent. while avoiding electrical appliances as much as possible, we recommend that you place the router in the middle of the room. The reason is that the transmission range of the wireless device is a sphere. In the middle of the room, the diameter of the signal range can cover the whole house, in order to achieve better transmission performance, as to how to achieve the best signal performance, to avoid the occurrence of wireless router disconnection, you need to adjust it according to the actual environment.
4. When a company uses multiple wireless routers, channel conflicts are also a factor that we have to consider. The IEEE802.11b/g standard only supports three non-overlapping transmission channels, only Channels 1, 6, 11, and 13 do not conflict with each other. When multiple wireless devices use the same channel, the transmission may be unsatisfactory or even dropped, if a channel conflict occurs, you can select the one that best suits you according to all wireless channels in the region on the router configuration page. 5. The company's wireless routers are enabled for a long time, so the reason for disconnection may be due to the heat dissipation problem of the routers. we need to pay attention to using external radiators for auxiliary heat dissipation, do not combine broadband devices and wireless routers. This will increase the heat dissipation burden of various devices.