Cloudstack recording issues encountered in the deployment

1, Cloudstack will only bridge the default route of the network card, if your intranet management needs to manually bridge, network configuration needs to fill in the specific bridge name, because this toss a long time, the specific Bridge command is, and network card configuration file as follows:

Brctl ADDBR cloudbr0brctl addif cloudbr0 em2[[email protected] data]# cat/etc/sysconfig/network-scripts/ifcfg-em2 Device=em2onboot=yesipaddr=192.168.1.1netmask=255.255.255.0nm_controlled=yesbridge=cloudbr0[[email protected] data]# cat/etc/sysconfig/network-scripts/ifcfg-cloudbr0 device=cloudbr0onboot=yesipaddr=192.168.1.1netmask= 255.255.255.0nm_controlled=yestype=bridge

2, add the ISO time has been shown that the connection failed, the solution is to change in the global configuration file, need to restart the Cloudstack-management service

Secstorage.allowed.internal.sites Vaules 192.168.1.0/24

3. After the add zone succeeds, there are two system VMS, two VMs can destroy the rebuild, and two VMS correspond to primary storage and secondary storage respectively.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6E/41/wKioL1V31fmhCjZrAADc6qAS27M472.jpg "title=" 1.png " alt= "Wkiol1v31fmhcjzraadc6qas27m472.jpg"/>

This article is from the "Foot Traces" blog, please be sure to keep this source http://dingmh.blog.51cto.com/188555/1660387

Cloudstack recording issues encountered in the deployment