Community Broadband network cable households How to install a wireless router

Community fiber broadband users with user name password:

1, connect the computer and the router: the outside of the network into the cable plug in the router's WAN to look carefully at the marked. Find another network cable, one on the router LAN port, and the other on the router's LAN port (1, 2, 3, 4) can be.

2, into the Router settings interface: Open the desktop browser, in the address bar input 192.168.1.1 or 192.168.0.1 this according to your router's brand, over the back of the router has written, input completed click to go to or hit enter return. In the pop-up landing box to enter the Router management default username password is generally admin, the back of the router is also written. If not indicated should be let you set a password set to complete after click OK.

Here is a problem often appears: 192.168.1.1 go http://www.45it.com/www/201111/27134.htm see Solve, if normal access is not necessary.

3, this is entered after the screen, we now see is the Setup Wizard, in the upper left corner click the Setup Wizard-next.

4. Choose the way of surfing the Internet, generally choose PPPoE (ADSL virtual dialing), point next.

5. This is to fill in the broadband account and password.

6. Here is the password to set the name without the line. The SSID is the name of the wireless router, and the following is the password required to connect to the wireless router.

7. Finish Setup. If you have a save item, be sure to click Save.

The 7th step is often a hint: the WAN port and LAN port IP can not be in the same network segment, then need to modify the IP address of the router, because the router's IP and Community network device IP conflict.

Community fiber Broadband No user name password directly plugged into the computer can not need to dial the Internet users: In accordance with the 1th step to connect the router's line, the 2nd step into the router settings interface. To step three, click the set interface to the left wireless settings, wireless security settings, fill out a wireless wifi password, restart the router can be online.

The user who does not have the username password Internet chooses is the dynamic Internet form, and the router initial default form of the Internet is to obtain dynamically, so skip the setting can be used directly, need to pay attention to aspect and have User name password user.

Many community broadband users will not be connected to the WAN port, if through cloning Mac, changed the Crystal Head is not good, then must be the room to your home the quality of the network cable has problems, need to replace this network cable, this situation will look at interpersonal relationships generally no one easily for you to change.