Computer reload system can not reload, always blue screen, is not the hard drive burned out!

What's the blue screen code?
Sometimes it's a memory problem.
The following content for Baidu know Ctangel personal summary, not network replication, are all personal daily work encountered and clearly determine the reason. Please specify the source if you want to copy.
Here are a few typical blue screen fault causes and solutions.
First, 0X0000000A
This blue screen code and hardware-independent, is the driver and software conflict caused, the earliest discovery of this code is because the company's Dell Machine USB keyboard and QQ2007 keyboard encryption program has the conflict found this problem. Also in the IBM T-series notebook top drive error has been generated.
If your machine is blue screen, and every time it is this code please think about the recent update of what software or what kind of driver, uninstall it and look at it. The general situation can be solved, if really can't think of, and very frequently, then there is no way to re-do the system bar.
Second, 0X0000007B
This code is related to the hard disk, but do not have to be afraid, there is no bad way, is set the problem or the virus caused by the hard drive boot partition error.
If you are using the original system disk installation system of this problem, it means that your machine configuration is still relatively new, as the old system disk, do not recognize the new hard disk interface, so you have to enter the BIOS to change the hard disk mode to IDE compatibility mode. Of course, people are now using the ghost version of the operating system, compared to the new ghost disk is not the problem.
If your operating system has been used for some time, suddenly one day this problem, then I am sorry, the virus caused, boot press F8, select the last correct configuration, restore not to normal mode then please re-do the system.
Third, 0X000000ED
This fault and hard disk has a relationship, the system probability is relatively large, hard disk really bad probability is relatively small. I've got no more than 20 blue screen machines with this code, and only one of them is a hard drive that really has a bad path. The rest is a problem, repair, this is one of the few can be repaired blue screen code.
The repair method is to find the original system installation disk (or the gold finger V6 the PE boot interface with console repair). Here said using the system disk method, the system disk into the CD-ROM drive, boot to the installation interface, select Press R to enter the console repair, enter the console will appear after the prompt C \ Everyone here input chkdsk-r and then it will automatically detect and fix the problem, after the repair is completed restart the computer can enter the system, after entering the system it is best to first antivirus, and then restart a try, if normal, then there is no problem, if you give this code, it means that the hard disk has a problem, Need to be replaced, or to separate the problematic areas into a hidden partition, using the space behind to install the system.
Add: If the use of a PE disk with the console repair, then enter after the C: not your system disk, but the PE system disk, so you have to press D: Enter E: Enter such a test, then how to determine which is your system disk? That is, for example, you press the D: Return and enter Dir return The DOS command that displays the directory is definitely not your problem partition. If you wait a long time, and then a directory enumeration error, then the hint, it is right, it is a problem. It's good to use CHKDSK here.
Iv. 0X0000007E, 0X0000008E
These two codes are caused by viruses, anti-virus can. Normal mode can not go to boot press F8 Safe mode. Of course, there may be memory, you can try to reseat the memory, generally this code memory corruption is not a small probability.
Wu, 0X00000050
Hardware failure, the possibility of hard disk is very large. If each time out of this code, first change a hard disk to try the machine can start normally, if the test drive is not a problem, then try the memory, memory also tried, change the CPU, in short, this must be a hardware failure.
Liu, 0X000000D1
This code is generally related to the graphics card, it is possible that the video card is damaged, or just because the installation of a less compatible graphics driver caused by the phenomenon of the proposed flower screen first to find a friend to borrow a video card plug in the test, or the host has integrated graphics, with integrated video card to try. If there is no flower screen phenomenon, then replace the purchase of the machine with the video card driver to try.
Seven, coooo21a
C at the beginning of the fault, it reported the fault is very damndest, reported unknown hardware failure, but the code of this type of C is mostly independent of the hardware. It is basically a drive that starts at the same time as the system! or service problems, to give an example, I gave a notebook of the F-disk changed to e-disk, the result of the start of this type of C code, and finally found that plug in a USB stick can start normally, because the plug-in system has an F disk, and then I found the hidden files, is the system when the power-on write. I unplug this u disk This problem is again, and then the e-disk back to the F problem there is no, want to what and system to start the software to stay in the F disk some files, without it will build themselves, but even F disk are not, also can only error, so see this kind of blue screen can be compared.
Eight, each blue screen code is not the same
This problem is basically caused by hardware, especially in memory as the first need to suspect the object, replace the memory attempt, the second possibility is CPU although this thing does not love bad, but from 06 to now I also met two, other hardware basically does not cause the blue screen code casually change situation.
Nine, occasionally blue screen, and the code flashed and restarted the problem
There are two possible ways to do this.
1, take XP, for example, click on the right mouse button on my computer to select Properties, find the Advanced tab, find the following startup and troubleshooting items, click Settings. Again pop-up window found in the middle ' system failure ' there are three options, the third automatic restart, the check off the option, and then a blue screen will stop.
2, has done the above settings, but will be a flash and reboot, that is the video card or CPU overheating caused by open the chassis to see the status of the cooling fan and radiator.
Another boot on the blue screen can not see the code flashed and then self-restart the situation. This time has not been able to set the first step in the system, then the machine started when the press F8, choose to disable restart after the start of the failure, the selection after the boot failed, the system will stop in the blue screen code there, so that you can follow the blue screen code to see the problem.
Ten, other blue screen code
Refer to the seventh, generally first do system confirmation is not a system problem, and then test the hardware in the following order, first of all the memory is the most likely, then the CPU, then the hard disk, and finally the graphics card, the motherboard will not be a blue screen.

Computer reload system can not reload, always blue screen, is not the hard drive burned out!