Connect all kinds of devices to the Dormitory Campus Network after lights out [Dalian Institute of Technology Software]

I don't know what policies other schools are. But our school turned off the lights on time at 10.30. That is to say, the light-off time is not the sleep time. So for us, going online after we turn off the lights becomes a problem.

Category 1: wired Internet Access & fixation (desktops, laptops, etc)

This category is easy to handle, and you can directly mount the network cable to continue. However, only one device can be connected to the network. You can also use your laptop as a stepping stone for other devices to access the Internet. If this method can meet your needs, congratulations, you don't have to worry about it.

Category 2: wireless Internet access (laptops, mobile phones, tablets, etc)

(If you have both wired and online functions, and the cable can meet your needs, you do not need to continue to struggle. You can decide the solution based on your needs)

For this type, sometimes it hurts. For example, my personal situation is: there is a network, can, but can only pull the wire to the bed with a notebook. Mobile phones and tablets can only connect to CMCC. (Although CMCC is quite useful, it always wants to connect the school's network without wireless connection ..). At this time, the problem becomes, how to achieve wireless connection to the campus network after lights out.

-------------------------------------------------------------- Gorgeous split line ------------------------------------------------------------

The previous part is almost the tangle process from the start of the network to the present. The final principle is to determine the method to use based on the needs.

Before discussing wireless connection to the campus network after the lights are turned off, we should first discuss some other content and try to make it as easy as possible.

Use your computer to go to campus network Round 1 :! Fight!

The Campus Network (school) is configured with a static IP address.

(I am using a vro now. borrow it. During normal connection, you should find IPv4 protocol settings in the system's Network Management)

IP addresses, gateways, and DNS servers are provided by schools. After the IP addresses are correctly filled, you can connect to the Internet normally. At the same time, the MAC address of the local machine is also provided when the network is opened. It seems that the IP address and MAC address are bound, but we do not know what the school is bound. In short, if you open the network and leave the wrong MAC address, you will be unable to rush to the Internet. Unless you spend five repairs or change the MAC address. Check the MAC address of the RJ45 port ). If you have kids shoes, you may have changed the MAC address to the MAC address of the wireless network card.

K.o.

Vro connected to campus network Round 2! Fight!

After the local machine is connected to the Internet, I will think about how to make my mobile phone tablet smack. Of course, you can share the laptop network with me, such as my WiFi. Obviously, a more convenient method is to create a vro. In this way, you do not need to enter the IP magic horse in the center every time.

Normal router (TP-LINK as an example), there will be such a column

LAN = Local Area Network is the LAN port.

WAN = wide area network is the wide area network port.

Enter the parameters provided by the school in the WAN port settings. Same as the graph in Round 1. Remember to select static IP (pppoe type is dial-up Internet access ).

You cannot access the Internet because the MAC address of the WAN port has not been changed.

Clone the MAC address,

Enter the MAC address and click Save. Of course, if you are using your computer (the one with the MAC address left) to set up a router, you can directly click Clone MAC address. "The MAC address of the current PC management interface is the MAC address of the WAN port.

After the configuration is complete, enter the running status to check the WAN port status.

Check the MAC address, IP address, gateway, and DNS servers in the WAN port status in sequence. Check the WAN port traffic statistics. If the received data is growing, the Internet connection should be successful.

If not, restart the router and try again several times. You can set it on the wireless connection ~ I can only tell you the details.

K.0.

After the lights are turned off, the campus network wireless connection to round 3! Flight!

At this time, you should have successfully used the router to access the Internet. At this time, the wild should become larger. When the router lights out, it will be suspended. If you want to continue surfing the Internet after turning off the lights, you have to get stuck again. If you still need wireless connection. You still need help from the vro. One way is to use UPS to continue power supply to the router. However, if you use UPS to power your vro, you will always feel like they are hitting the ground. What's more, most children's shoes don't want to buy a good ups, and the ups in the early 200 s should not be suspended for a long time. What's more, it's a waste of vrouters. Now, the main character is coming out, mini route! Generally, a mini route has multiple working modes:

The AP is used to expand the wireless functions of the LAN, so you have to have a vro or vswitch. Connect the LAN port to the LAN port on the router. There is a child paper that uses AP mode to connect to the campus network, which is doomed to be unable to connect.

You can temporarily ignore the following three types. We use the router mode. The subsequent configurations are the same as those in round 2. To help you succeed.

I used a TL-WR702N, put on the summer vacation, a USB cable from the bed wall stretched down to power the router. Put a plug-in on the bedside. Power supply with plug-ins at ordinary times. Turn off the light, insert a large battery, and then dry.

(Ke, I entered this mode when I wrote this article ~~~~)