Connect to the Windows desktop remotely using Rdesktop

previously used is the KDE under the KRDC. The program's Grab Keys feature has a bugthat causes ALT + TAB to not be captured most of the time, so you can't use the keyboard to switch windows. However, its full-screen function is normal, in the case of multi-monitor, full screen is only valid on one screen. In the end, change back to rdesktop. The command is as follows:

Rdesktop-a 32-u user_name-g 1920x1030-x 0x80-r clipboard:primaryclipboard 192.168.1.102

Each option has the following meanings:

• -A: Use of the three-digit color;

• -U gen: Specify user name;

• -G 1920x1030: Specifies the window size. Because in multi-monitor cases, the rdesktop -f full screen option, and only the window size can be specified directly. Originally home Pc The primary display has a resolution of 1920x1080 1030 KDE special Windows Settings Rdesktop

• -X 0x80: Specifies the user experience level. In the rdesktop source code, there are:#define rdp5_enable_font_smoothing 0x80. Therefore, setting the value to 0x80can show the best font effect. (originally set for LAN, although the color depth is added to the maximum value , but the font display has no ClearType effect);

• -R Clipboard:primaryclipboard: Realize the Clipboard sharing between the machine and the remote host;

• Finally, specify the remote host's IP address.

The following script was created Rdcwin To connect to the remote host:

#!/bin/bash

If[-Z $]; Then

echo "Default host 192.168.1.102 would be conneted!"

host=192.168.1.102

Else

host=$1

Fi

Rdesktop-a 32-u user_name-g 1920x1030-x 0x80-rclipboard:primaryclipboard $host

For more details, refer to here :

Rdesktop:connect to Windows 7 and Vista with ClearType fontsmoothing enabled

So Windows Vista finally allows-enablecleartype font smoothing for Remote desktop/terminal servicessessions. Update:windows XP SP3 does too!

If you try to connect to a machinerunning Windows XP SP 3 or later using Rdesktop, you won ' t getsmoothed font typing since At the time of this writing rdesktop Doesnot officially offer a option to control this feature. However, Hereis a workaround:

Rdesktop allows to specify the rdp5experience via the-x experience switch.

One can either define one of Threedefault experiences (modem, broadband, LAN) or one can specify a Rawhex value that is SE nd to the server.

Note:you can skip over this rathertechnical part, if your ' re not interested in the details. You ' Llfind the workaround below.

This hex value is actually a combinationof defined bit flags. After some tinkering I found that the hex value0x80 would enable font smoothing for the connection.

The file constants.h of the rdesktopsources contains these flags:

#define Rdp5_disable_nothing 0x00

#define Rdp5_no_wallpaper 0x01

#define RDP5_NO_FULLWINDOWDRAG 0x02

#define Rdp5_no_menuanimations 0x04

#define Rdp5_no_theming 0x08

#define Rdp5_no_cursor_shadow 0x20

#define RDP5_NO_CURSORSETTINGS 0x40/* Disables cursor blinking */

So, naturally an additional flag constantcan is defined like this:

#define RDP5_ENABLE_FONT_SMOOTHING0X80

The file rdesktop.c would has to beextended preferably a additional argument that controls Thefont smoothing.

If you want to use a font smoothing withrdesktop now there are to combine the flags (bitwise OR, addition Willdo too) and SPE Cify the result via the-x switch.

Here are the workaround for the threedefaults mentioned above:

Rdesktop-x 0x8F Mywinserver # equalsthe Modem default + font smoothing

Rdesktop-x 0x81 mywinserver # equalsthe Broadband default + font smoothing

Rdesktop-x 0x80 mywinserver # equalsthe LAN default + font smoothing

Connect to the Windows desktop remotely using Rdesktop