Dell 2950 DRAC Remote settings

belongs to Notes

1. First insert the network cable into the Dell 2950 DRAC network Port

2. start the machine, and then start the machine self-test, pay special attention to the screen prompts, and so on when there is CRTL + E, immediately press CRTL + E to enter the Setup interface.

3.after entering the admin interface, set up the following:
   1. Move the blue light bar to the IPMI over LAN option, and press SPACEBAR to appear!! warning!! The tip, no matter if it knocks in the skip, then the right off will turn on
   2. Then move the light bar to the LAN parameters option to enter the IP settings status, set up the relevant IP subnets and gateways three important options, where:
IP address of Ethernet IP addresses server
Subnet Mask Subnet Masks
Default Gateway Gateways
Once you've set it up, press ESC to exit to the total menu.
   3, move the light bar to the LAN User Configuration option, hit Enter to enter the user settings state, the light strip to enter PASSWORD, enter the password, do not have punctuation, preferably all lowercase letters, Enter password after hit enter will automatically jump to confirm password, enter the password repeatedly, enter finished press ENTER return to the total menu.
   4, confirm no problem, click the ESC key, come out a small dialog box, let the choice, at this time select Save changes and exit option for saving the exit, at this time the machine began to continue to boot the system.

4. Using the Software

2, with Ipmish.exe
    Copy the Ipmish.exe to the D drive or the C-packing directory and execute the following command to remotely power-supply the server
   such as: IPMISH.EXE-IP server IP address-u root-p password Power on/reset/off
   Where power on hard boot
   Power Reset Hard Restart machine
   Power off hard shutdown
   example Ipmish.exe-ip 192.168.*.*-u root-pThe password power on can be turned on to the server and other Remote Desktop implementations are available.

Dell 2950 DRAC Remote settings