Different switches can communicate with the same VLAN, but different VLANs cannot.

Different switches can communicate with the same VLAN, but different VLANs cannot.

I,

Vswitch Port
6) switchport access vlan 100 -- allocate the port to the vlan

7) Likewise, add the two vswitch-related ports to the VLAN 100 that has been connected in a serial connection.

8) enter port f0/10 of the two switches and configure the trunk command: switchport mode trunk.

Iv. Deployment Solution 2

Note: These two implementation methods are not recommended in the real environment.

1) enter port f0/10 of the two switches and include them in VLAN 100.

2) If the vswitch is a layer-3 switch, you can enter port f0/10 of the two vswitches and run the command to enable the routing function: no switchport