DLink router IE browser address bar input 192.168.0.1 cannot be found

Check whether the computer is connected to the LAN port (any mouthful in the 1,2,3,4 mouth), and whether the corresponding LED is bright

2. If you are a dial-up user, please remove the broadband dial-up connection first

3. Check IE whether the agent set up, if please cancel. Click on the tool inside the browser →internet options → connection, the following figure:

If you set up a proxy, it will also cause the Web page can not open the phenomenon occurs.

4. Control Panel → network connection → local connection → Right key property, double-click Internet Protocol (TCP/IP) to enter, the IP and DNS are selected for automatic acquisition, determined to save. The following figure:

5. Restart the computer and then try to login 192.168.0.1 management interface.

6. If the above operation or not, you can try to reset, the method is: the case of electricity with paper clips or ballpoint pen core to the power jack next to the reset hole 8 seconds, let go