Dynamic IP fails to get the default gateway, showing 0.0.0.0 solution

The IP address uses the auto Get IP method, can obtain the IP address and the subnet mask, the default gateway cannot obtain, displays the 0.0.0.0, by repairing the Winsock and the LSP can solve this problem, the concrete steps are as follows:
I. Repair of Winsock
1. Click Start > Run, type cmd, and then click OK;
2. Type netsh winsock reset catalog and press ENTER;
3. Type the netsh int ip reset reset.log and press ENTER;
4. Restart the computer.

If you cannot get the default gateway yet, proceed to step two
Second, repair LSP
1. LSP Repair Tool with 360 security Defender: 360-feature Daquan-Network optimization-Repair network LSP
Or
2. Jinshan LSP Repair Tool

Third, cryptsvc repair

1. Click Start > Run, type cmd, and then click OK;
2. Type net stop cryptsvc and press ENTER;
3. Type ren%systemroot%\system32\catroot2 oldcatroot2 and press ENTER;
4. Restart the computer.

Dynamic IP fails to get the default gateway, showing 0.0.0.0 solution