EIP tool-verypal2.0 official version tutorial

Font size: Small
This article was published on March 23, 2009-03-23. Recommendation degree: |
Viewed: 4574 Times, 16 people expressed their views.

I would like to explain why I strongly recommend this IP address change tool. What is better?
I personally think it's basically three points, and I feel good.
First, remote data replication is supported. If your client has changed, you can directly modify the data on the server side. When the client changes the IP address, it will automatically go to the server to find the configuration file, the configuration file can be encrypted.
Second, the client supports screen lock when changing the IP address to prevent the IP address from being moved by the customer. You can unlock pubwin and Vientiane billing software.
Third: the client supports automatic driver installation. If a driver such as the current card or motherboard is not always installed during the IP address change, the tool will automatically click Next when prompted to install the driver, click OK.
But unfortunately, the author has stopped updating... . OK. Now that you are finished, go to the topic.

Download tool:
EIP tool-verypal2.0 official version! Strongly recommended! -Dead sex does not change's blog ~
Http://www.clxp.net.cn/article.asp? Id = 1300

File Description: After decompression, the package contains verypal.exe?vp=.bat(lz-myst ,、cdk.txt.
Verypal.exe --- is the script editor of The verypal tool and a client generation tool.
VP assistant. Bat --- is a script for Ros users to import IP-MAC addresses in batches. After the batch processing is run, it will be described.
Cdk.txt --- It is the CDK of CS. There are 470 in total, and it is enough.

Step 1 collect IP-MAC information:
Run verypal.exe = "new" = "Search ". Enter the IP address range to be searched to support cross-network segment search.
Example: Starting IP: 192.168.0.1/ending IP: 192.168.1.254
Example: Starting IP: 192.168.0.1, ending IP: 192.168.0.254
Enter the IP address range and click search. Is the picture in the search, and the program will keep searching cyclically. At this time, someone will ask, what if it is not started? Two methods.
Method 1: Collect data when no startup is started or when the opportunity is full, but it is not realistic for the maintenance team. Then use method 2.
Method 2: add the log manually according to the help records in the route. Ros support makes it easy to use the verpal assistant and import data through verypal.

Step 2 configure scripts and system commands:
Right-click "Run verypal.exe =" in the "Script Name" area, and "New verypal script" = ". If you need to rename the file, right-click the created" New verypal script, rename =, and double-click the script =. The page is displayed, as shown in figure

See the following "system commands" Description:
1) Run: As shown in

This function allows you to execute a custom script after modifying the IP address. In the figure, "E: \ system update \ autorun \ over. bat "is my script. I can use this script to start pubwin or the Oriental site fee-recording software, because after my system is ready, after the connection to the server is successful, I canceled the billing software operation, it can also be used to cancel the right-click of the video card, delete unnecessary startup items, delete the security mode, and delete the last correct configuration. After you set the path, click "+" to add this command. The command execution sequence can be moved.
Attach my over. Bat code (note: the commands in the running can be customized, not necessarily the same as me .) Copy the content to the clipboard program code @ echo off
Reg Add "HKEY_LOCAL_MACHINE \ SYSTEM \ select"/V lastknowngood/T REG_DWORD/d 00000001/F
Reg Add "HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon"/V reportbootok/T REG_SZ/D 0/F
Reg Delete "HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ safeboot \ minimal"/F
Reg Delete "HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ safeboot \ Network"/F
Regsvr32/u/s igfxpph. dll
Reg Delete hkey_classes_root \ directory \ background \ shellex \ contextmenuhandlers/F
Reg add hkey_classes_root \ directory \ background \ shellex \ contextmenuhandlers \ new/ve/d {D969A300-E7FF-11d0-A93B-00A0C90F2719}
Reg Delete HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/F
Reg Delete hkcu \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/F
Reg add HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V internat/T REG_SZ/d c: \ windows \ system32 \ internat.exe/F
Reg add HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V barclienttask/T REG_SZ/D "E: \ nbmsclient \ barclienttask.exe-startup"/F
Reg add HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V watcher/T REG_SZ/d c: \ watcher \ clientofwatcher.exe/F
Reg add hkcu \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V fileclient/T REG_SZ/D "C: \ Program Files \ Oriental outlet \ Client \ fileclient3.exe"/F
Reg add HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V intelliipoint/T REG_SZ/D "C: \ Program Files \ microsoft intelliipoint \ ipoint.exe"/F
Reg add HKLM \ Software \ Microsoft \ Windows \ CurrentVersion \ Run/V itype/T REG_SZ/D "C: \ Program Files \ microsoft intelliitype PRO \ itype.exe"/F
SC config clientmain start = auto
SC config extendstab start = auto
SC config "ATI hotkey poller" Start = disabled
SC config nvsvc start = disabled
SC config irmon start = disabled
Exit

2) latency: As shown in

This function does not have much effect. If needed, you can add the latency in the appropriate part. Click "+" to add it to the script.

3) Check driver completed, as shown in

This function is very good. We recommend that you put this command in the first article, because after the system is engraved, a prompt "system settings change, need to take effect after restart" will be displayed on other machines, with this command, when this prompt is displayed, the wait time will be automatically calculated from the beginning. If a new hardware is found during this process, the program will automatically click Next to complete. The installation of all drivers is complete. The restart operation is automatically executed. After the restart, all commands are executed.

4) set network properties, as shown in

Automatically change the core part of the IP tool. Set it according to your actual situation and click "+" to add it to the script.

5) set the wallpaper: You can set it through the boot channel. You do not need to set it here.
6) set resolution, as shown in

If you have a host configuration and multiple Display sizes, this feature is useful. You can create multiple scripts to set the system resolution for each region.

7) Add a startup Item: never used, never used, skipped.
8) install and restore: As shown in

Since the software was created in the popular period of DF and the flash recovery of the standalone version, this function is basically unavailable now. If you need it, all the friends are Chinese, you can understand it at a glance.

9) Disable other NICs: It's easy to say that you can disable the inactive Nic. You need to think about the situation.
10) restart the computer: Set it to the last one and it will be OK. After all the commands are executed, the computer will be restarted automatically.
11) disable the computer: select this option if no other action is required after the setting is complete.
12) uninstall verypal client: This function allows a user program to delete its own startup items, before restarting the computer and installing and restoring it.

Step 3: Set the CDK and IPX numbers and configure the script to the specific machine name.
Right-click "modify" and select the machine to be configured (multiple options can be selected) = ". The page is displayed.

Computer Name: Consists of three parts: the first letter, the second part of the serial number, and the third part of the end is similar to the first part.
For example, my machine naming method is A001-A254; then the first part adds a, the second part adds 1, the third part is empty.
If my machine is named as a A001VIP-A254VIP, add a In the first part, 1 in the second part, and VIP in the third part.

NIC address: skipped
Internal network number:That is, the IPX protocol number, which has a total of 8 bits. Enter 00000001, and it will be automatically sorted.
CS-CDK:Add all the cdks In the compressed package, and the program will automatically set them.
Script:Didn't we say we can execute different scripts based on different machines? This is implemented here. For example, if the machine selected in the figure is the LCD area, then I will select the LCD area for the script, as long as it meets the MAC of the selected machine, the script changes the information.

At this point, the script has been basically set up, and the client will be generated.

Step 4: Generate client and configuration file encryption.
When verypal.exe = tool = is run, the client will be encrypted and generated. The meaning of encryption is to encrypt the configuration file, which has no major effect, however, it still plays a role in online maintenance. The following describes how to generate a client.

1) set the configuration file path. We recommend that you use the shared path, which is not the same as that of common IP addresses. For example

2) set the unlock password, because the client is locked during runtime, and this password is used to unlock.
3) choose here for the Client Management Software. We recommend that you select other options. This feature is used to unlock the billing software, because we can set it to prevent the billing software from running on the master disk, so you can select another one. If you have to enable the recording software to start up and run, your recording password will be logged out in this preparation file. It is very bad to be known. Therefore, we recommend that you select another one.
4) Select the client storage location. You can run the generated client once on the client. After running the client, it automatically copies the client itself to the System32 directory and adds the startup Item.

Note: server sharing must be accessible. For example, if your current server IP address is 192.168.1.20, you can add the Server IP Address by using the local link = "TCP/IP protocol =" property = "Advanced =.
So why avoid the local IP address segment? Because the system must be the same IP address after the client completes the process, he needs to modify the temporary IP address and then try to connect to the server. Therefore, if you set the IP address segment of the server to the local IP address segment, the possibility of IP address conflict is increased.

Attached client running film:
After the client is running, change the temporary IP address to 10.0.0.x to prevent IP conflicts and the configuration file cannot be copied.

Copy the script on the server to the local machine.

Execute the script according to the script content.

A very simple software has such a function in detail. Although it is called Luo Suo, the chances of errors may be less.