Electrician Knife Safe Operation Method (reprint)

The safe operation method of Electrician knife

time: 2015-12-25-22:55:11 Edit: Electrician's section: Electrician Tools

Guide: How to use electrician knife? Electrician Knife safe Operation Technology and operation method, electrician knife as a common electrician of maintenance electrician, how to correctly and safely use, here share under electrician knife safe operation Technology and operation method, for everyone reference.

How to use an electrician's knife? The safe operation method of Electrician knife

Before the introduction of the correct use of electrical knives and precautions, this section for everyone to bring electrical knife safe operation method, together to see.

First, the electric Knife safe operation Technology

1, all the use of electrical knives must comply with the relevant national safety regulations, factory certification and other relevant information in the first time full complete.

2, electrician knife used in electrical decoration work cutting wire and cable insulation, ropes, stakes and soft metal.

3, the use of electrical knives, must be a power outage operation, and the knife can not be against the person.

4, electrician knife is commonly used as a cutting tool. Ordinary electrician knives are made up of blades, blades, hilt and knives. When not in use, shrink the blade into the hilt.

Second, the Electrician knife operation method:

1, use electrician knife to cut off the wire insulation layer, the blade can be slightly tilted up some, with the edge of the fillet of the wire core. Do not cut the edge perpendicular to the wire cutting insulating layer, because it is easy to cut the wire wire core.

2, the wire connector should be removed before the insulation on the wire.

3, with the electrician knife cut peel, the blade must not hurt the core line. The commonly used methods of exploitation are the stage peeling and oblique cutting method.

4, the blade part of the electrician to grind sharp to exploit the wire, but not too sharp, too sharp and easy to cut the wire core, grinding too blunt, it can not exploit the insulating layer. Grinding the edge of the general use of sharpening stone or oil grinding stone, grinding and then the bottom of the grinding point chamfer, that is, the edge slightly round some.

5, round wood and wood Groove board or plastic groove plate of the Kiss of the groove, can be used electrician knife in the construction site cutting.

6, multi-functional electrical knife saw blade, can be used to cut wood, bamboo strips, the production of wood tenon, bamboo tenon.

7, multi-functional electrician knife In addition to the blade, there are saw blades, awl, reaming cone and so on.

8, in the hard hardwood screw is laborious, can first use multi-functional electrician knife awl cone a hole, then screw the screw will be more effort.

9, the circular wood needs to drill the threading hole, may first use the Awl to drill out the small hole, then uses the reaming cone to enlarge the small hole, spreads the thicker wire through.

Original address: http://www.dgjs123.com/dggj/419.htm

Electrician Knife Safe Operation Method (reprint)