This blockage causes the droplets to be sprayed out or the ink to be sprayed with a distinct bifurcation phenomenon, so that the ink on the paper on the coverage is not enough, but also will lead to jet ink tilt, on the paper positioning offset, so that the printed artwork let people feel the coarse particles. A severe blockage causes a lack of color. In addition, the purpose of adding a permanent chip is to save ink, and Epson printer boot does not clean the nozzle, causing plugging head and then desperately clean, not only can not save ink, but also will create more paper and ink waste.
------The ink system is a joy to worry about.
Because of its low price, the connection system has a certain user base in the market. The system first appeared at the end of 2002, after 2003 of development, in 2004, the road. General home users because the monthly ink consumption will not be very large, usually do not use this system. Some profit-seeking business output users, such as printing companies, advertising companies, and so on because of the monthly printing volume, as SMEs and particularly want to control costs, so the system will have a unique feeling. In general, the size of these companies will be about a few to 20 people. The company usually uses two or three Epson printer, the monthly ink consumption is about seven or eight sets. The use of the ink system, monthly can help them save a lot of money to buy ink cartridges.
Second, as an external product, the ink system has changed the structure of the Epson printer, the function of the Epson printer can not be fully realized, resulting in failure, such as serious plug is like. As a result of the system is a plug-in device, through the long pipeline to convey ink, it is easy to have air into the bubble, in addition to the original authentic ink because of production conditions are not guaranteed, easy to mix impurities, these are caused by the culprit.
First of all, the current ink system technology is not mature, uneven product quality, there are some small and medium-sized dealers in the interests of the operation of some of the products, these products for three without products, outside the packaging on the factory name, site, etc., so that the quality of ink can not be guaranteed, This is why users feel that the color effect of printing ink is not as good as using original ink.
In addition, because the pressure imbalance in the system will also cause ink leakage from the print head to the waste ink pad, in this state of the ink will accumulate more and leaked out even to the table. If these waste ink flow to the Epson printer's power board or Control Panel, will cause the circuit board short-circuit, resulting in Epson printer damage. Even if the waste ink does not overflow, when the Epson printer waste ink excess, waste ink pad volatilization of steam will also Epson Printer circuit board, action agencies and even the nozzle caused damage. On the contrary, the use of Epson printer manufacturers of original ink, boot flushing consumes less ink, waste ink pad full and lead to the problem of ink leakage will not appear. Even in case of a large number of long-term printing caused by the waste ink pad saturation, the machine will prompt alarm, the user simply to repair station to replace the new waste ink pad can be solved.
Third, also makes the ink system users The most headache problem is that the waste ink pad easily full. As we all know, Epson printer, if not used, the ink in the nozzle is necessarily due to evaporation of moisture and viscosity increased or dried up caused by congestion, so when the boot, Epson printer will automatically clean the nozzle. The use of the system, because of the long pipeline transmission, in the cleaning nozzle, greatly increased the production of waste ink, resulting in easy to fill the waste ink pads. Another plug after the need for a large number of ink cleaning nozzle, more make waste ink cushion unbearable burden.
So what is the difference between the system and the original cartridge, and why does it cause so much trouble to people? Do consumers succumb to low prices or are they sincere in printing quality?
Current 1/2 page
12 Next read the full text
