Fast configuration of D-link Wireless and wired broadband Routers

In the process of setting the D-LINK, we will encounter a variety of problems, so in the setting we should be correct and fast configuration, this article quickly detailed the D-LINK configuration method.

A: You need to know the configuration information provided by your ISP broadband provider, such as China Telecom ADSL, your ISP installation technician will leave this information after connecting Cable or DSL Modem and broadband. If you do not have such information, please contact your ISP before setting.

B: make sure all your network hardware devices are not powered on, including routers, PCs, Cable or DSL Modem.

C: connect an ethernet cable to the Ethernet NIC of your computer, and Connect the other end of the network cable to an Ethernet Port 1 to 4 of the router ).

D: if there are other computers that want to connect to the vro, repeat Step C.

E: Use another ethernet Cable to connect the WAN port of the router to the LAN port or Ethernet port of the Cable or DSL Modem. The WAN port of the router is the only port connected to your Modem. The lanports of other vswitches cannot be connected to Cable or DSL Modem.

F: turn on the power of Cable or DSL Modem, G: insert the 220V end of the AC power adapter into the power outlet, and the low-pressure connector at the other end into the power Jack of the router. Note! The active voltage of the D-link series router is 5 v dc. Do not connect other power adapters. If the router fails to connect to a power adapter with different voltages, the router will be damaged, please check carefully to confirm that the 5 v dc power adapter provided with the router is connected to the power supply. The power adapter burns down the router. We do not provide warranty service)

G: determine that the POWER supply, Internet WAN indicator, and WLAN wireless indicator on the front panel are on.

H: You need a computer to configure the router. Please turn on the power of your computer. You can also use a computer with a wireless network card to configure the router. Use the XP signal search software to search for the wireless signal SSID of the D-link Wireless route, find the wireless signal SSID name of D-link and click Connect. The default SSID of D-link Wireless routing is default)

Step 1 is complete. Now proceed to step 2. The following instructions will help you set up a router. You only need to set it once. Note! Set the network card of your computer to automatically obtain the IP address. The default network card of Windows is the automatically obtained IP address. For more information, see the Windows Help file.

A: Open your IE browser. in the address bar of the browser, enter 192.168.0.1 and press Enter.

B: A dialog box for entering the network password appears. In the "username" column, enter lowercase English: admin to keep the "password" column blank. Click OK.

C: HOME page of the router) the configuration page will appear in the browser. This route supports several broadband connection methods. The screen and available features of each basic setting will vary depending on the connection method you select. The following describes the connection modes based on your use.

D: If you want to set up broadband access, click the WAN option on the HOME page on the left of the HOME page) To Go To The WAN setting screen.

D1: the vast majority of users dialing virtual ADSL) Please click the third item PPPoE virtual dial-up connection ).

D2: enter your ADSL account and Password in the User Name column, retype Password repeated Password. The Service Name Server Name column is left blank. You do not need to fill in the IP AddressIP address column. The DNS Server AddressDNS Server address column is generally left blank, if your ISP requires you to enter DNS, enter in this column. Maximum Idle Time does not have automatic data traffic disconnection Time. Generally, if you enter 0 minutes, the domain name is always online. Auto-reconnect automatic connection function) generally, you can select Auto-reconnect automatic connection. You can select Manual as a Manual connection.) Select Dial-on-Demand as the link only when the webpage is opened ), click apply in the lower-right corner.

D3: After the D-link router is configured, the router is automatically connected. You can view the WAN connection information in the Stasus status option. If the WAN port is assigned an Internet IP address, you can use the D-link router to browse the Web page and surf the Internet.

If you have enabled PPPoE dialing for a vro, Delete the existing PPPoE dialing application on your computer.

E: Use Cable Modem for Cable TV Video broadband) or use a DHCP-enabled router to distribute broadband signals to your users, make sure that the network Cable connected to the Cable Modem is connected to the WAN port of the D-link route. Select the WAN on the HOME page). Select the first Dynamic IP Address to use a Dynamic IP Address on the WAN settings page. Press apply, you can connect to the Internet without complex settings.

E2: The D-link route automatically detects and obtains the IP address. You can view the WAN connection information in the Stasus status option. If the WAN port is assigned an Internet IP address, you can use the D-link route to browse the Web page and surf the Internet ..

F: Static IP Address: Use manual IP Address Setting)